Home › Forums › Product Discussion & Questions › BeoGram › Beogram CD 5500 right channel no sound
- This topic has 3 replies, 3 voices, and was last updated 1 year, 5 months ago by Dillen.
Viewing 4 posts - 1 through 4 (of 4 total)
-
AuthorPosts
-
10 June 2023 at 02:19 #47097
Hi B&O Fans,
a new small project on my table.
A Beogram CD 5500. After replacing the famous capacitor the CD runs now.
But unfortunately only on the left channel.
Cause i don´t have an oscilloscope – is there anything else, i should take a deeper look at?
I checked the solderings, but nothing obvious.
Best regards
69er
10 June 2023 at 14:42 #47098I would check the relay first. Perhaps the right channel isn’t making adequate contact.
10 June 2023 at 17:10 #47099Hi quatttro,
where is the relay in a Beogram cd?
best regards
69er
10 June 2023 at 17:50 #47100Check the filter capacitors and their respective resistors for the opamps in the analogue output stages.
Martin
-
AuthorPosts
Viewing 4 posts - 1 through 4 (of 4 total)
- You must be logged in to reply to this topic.