Home › Forums › General Discussion & Questions › General Discussion & Questions › Wanted: cassette heads
- This topic has 4 replies, 5 voices, and was last updated 2 years, 6 months ago by 
Viewing 5 posts - 1 through 5 (of 5 total)
	
- 
		AuthorPosts
- 
		
			
				
9 April 2023 at 10:20 #45631Pearsy BRONZE MemberI have a 2002. My tape deck runs fine, I just put new belts on but there is little to no sound coming out. I have to turn it right up to hear it, I was thinking it’s the heads? 
 any advice greatly appreciated9 April 2023 at 10:36 #45632Die_Bogener BRONZE MemberHeads defect? 99%= NO Caps defect, quite normal. Electrolyth and tantalum caps fail after this long time, that’s quite normal. 9 April 2023 at 14:36 #45633Dillen ModeratorBad tantals around the Dolby IC. I’ve seen that a couple of times. Martin 13 April 2023 at 12:14 #45634RobertBowman BRONZE MemberSpam removed 14 April 2023 at 12:38 #45635The head is probably intact. Only Bogen heads on open reel Beocords and Uhers pose problems. Do check capacitors around the Dolby circuit. 
- 
		AuthorPosts
Viewing 5 posts - 1 through 5 (of 5 total)
	
- You must be logged in to reply to this topic.
 
								 
 
 
 
 
								 
 
