3400 speed adjustment - BeoWorld Forum

3400 speed adjustment

This topic has 4 replies, 3 voices, and was last updated 1 year, 7 months ago by Tonymaine.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
14 October 2022 at 09:33 #39805
Tonymaine
BRONZE Member
- Topics Started 1
- Total Posts 3
Newby to beograms but experienced lightly in other decks. Got a 3400 5726. Replaced belt still running at 32.9 RPM. Where is the fine adjustment located?
15 October 2022 at 02:07 #39808
Tonymaine
BRONZE Member
- Topics Started 1
- Total Posts 3
Duh. Thanks. All good now.
15 October 2022 at 02:11 #39809
Tonymaine
BRONZE Member
- Topics Started 1
- Total Posts 3
Sorry. Forgot. I can only find service manual online. Is there a use manual
15 October 2022 at 05:50 #39806
Mark-sf
BRONZE Member
- Topics Started 0
- Total Posts 294
There are small knurled knobs under the black trim aligned with the speed indicators.
15 October 2022 at 07:23 #39807
Dillen
Moderator
- Topics Started 3
- Total Posts 593
A red fingerwheel sticks out at the rear of the operating panel – towards the platter, for fine adjustments.
A lit digit is on the panel right above it, indicating its setting. See the user manual.

Base adjustments can be accessed through holes the Beograms bottom plate.

Martin
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.