BeoSound 9000, Laser dirty

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #4920
    BRONZE Member

      Hi everyone

      At the moment I have a BeoSound 9000 (2526) which sometimes does not read the CD’s correctly.
      I think that only the laser unit is defective/or dirty.
      Has anyone of you already made experiences with such a repair? Does anyone have tips for cleaning or a suitable laser alternative to the “VAM1250”?
      I look forward to the feedback

      Greetings from Switzerland

      BRONZE Member

        I have a 9000 that does not read cd’s – I am told by a techie in Vancouver that the lasers are no longer made….so do you have any suggestions/comments – does unit need to be cleaned by a B&O technician?  At a loss to figure out how to repair/ clean etc.  i live on Vancouver Island BC Canada

        Keith Saunders
          • Hampshire, England

          When you try and read a CD does the disk make a small movement, then the words “Pause” appear in the display. If yes, then the laser is 99% the problem.

          For the Mark 2 & 3 the laser assembly can still be obtained. However, if you have a Mark 2 BS9000 there are two different laser assemblies.

        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.