Another item I'm looking for. If not availbale I'll try to make it myself.
The one I have now is badly scratched and with lots of nicotine😡
Thank you to our Sponsors
Acrylic perspex tuning plate Beomaster 5000
9 replies
I had a Beomaster 5000 where the signal strength meter cover was very brown - Tim Jarman assurred me it wasn't nicotine - just aging of the plastic - no amount of polishing would get rid of it. Good luck with fabricating one if you don't manage to get a replacement.
Cheers
Nigel
I think can manage to make one myself, thanks Nigel! Will post a picture when it's finished.
Fortunately my signal meter is still bright and clear.
I had a Beomaster 5000 where the signal strength meter cover was very brown - Tim Jarman assurred me it wasn't nicotine - just aging of the plastic - no amount of polishing would get rid of it. Good luck with fabricating one if you don't manage to get a replacement.
Cheers
Nigel
Hey Nigel,
I could not find one so I made one😁
Impressive result ! 🤒
Martin
excellent Leslie, how did you do your neat red line? - I made a couple of similar pieces for beomaster 901 volume and tone sliders but was never happy with the result...
Hi Ben73, just used a scratch-pen (is that the word?), make a fairly deep scratch and fill it with paint, let it dry a wipe the rest off, that's all.
edit: use a brush, that's obvious, but before you do, use tape on both side of the scratched line.
Wow! Impressive is not the word!!
Looks fantastic!
Cheers
Nigel
Please Log In to Reply
You must be logged in as a BeoWorld member to post replies to forum threads.
or
Join BeoWorld
Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.
Become a Member