My normal supplier has changed brand so I am currently working with a new supplier in search for a solution to this problem. Hope to have something available shortly. 

Martin

I have some 10.000uF 80V in stock now (35x52mm).

PM me for details. 

Martin

Hello,

I have a beolab penta which suffers of a kind of humming in the speakers, like some static electricity is building up.
I've got the potmeters checkes, but without result. I've changed the caps in the soundpart, but also without success.

Could recapping the powersupply would do the job?

Kind regards

Joost Declercq,
Gent

Gent,

Is the humming present also without an input signal (light green) ?

Does the cooling fin or transformer become hot just by being powered on ?

Like everywhere else, capacitors age and cause problems. The Beolab Penta speakers are no exception so caps cannot be ruled out. I normally repair the older audio stuff but more and more people come to me with Penta problems and a wide solution is hopefully underway; 

A Beolab Penta upgrade kit containing a full set of new capacitors (all 105deg rather than the original 85deg) both for the power supply and the amplifier, new and better opamps and signal path coupling capacitors for the preamp and audiophile filter capacitors for the crossovers is in the making, hopefully ready very soon.

Martin

Hi,

Well, the humming is indeed sometimes present, without a source (for instance, when the CD ended).  It sounds like static crumbling and isn't affected by the volumecontrol.

I haven't yet checked the heat of the cooling fin.  I'll check that, when they are back in the livingroom (moved them, to do some painting).

I've changed the caps and opamps in the amplifier and the crossovers, but not yet in power supply.  So, I'm interested if there's a set of capacitors for that.

PS: my name is Joost.  Gent is the place where I live :)

Joost 

Joost:

Silly question, but it has happened to me more than I care to acknowledge...

Are you absolutely certain that the noise is originating from the Pentas?

 Ie. with no signal cable plugged in, do you hear the same noise?

Sometimes we over look the obvious; the problem could be originating from your Beomaster or from faulty signal cable and that the Penta amp is fine. Plug your ipod or some independent source in and see if the Pentas still act up. And to be sure... swap everything over to the other Penta to confirm.

Just double check :)

Derek
 

Hello,

 thanks for all the suggestions.

I tried all different connections and positions.  I changed cables, sources, powersockets, changed from daisychaining the powerlink to seperate powerlink,.... I connected other speakers to the beomaster, active and passive, but they sounded ok...  Well, I'm out of inspiration.

The sound I hear isn't really humming, but more some kind of cracking, like when switching radiostations with an old analog receiver with dial (well, something like that).  The cracking isn't always present.  That's the problem, because I brought it twice to my dealer, but he didn't hear anything :-(.

I changed the caps in the amplifier, without result.  Could recapping the powersupply do any good?

kind regards,

Joost