Thank you to our Sponsors
Hi all,
My Beocenter 9300 wich is ten years old doesn't answer to remote commands since recently.
I though it was the remote, but i changed the batteries and it was the same.
Manually or by link, the beocenter works well, only by remote it doen't work.
What can be the problem ?
Thanks for your help
Zazou
Location: Strasbourg / France
My B&O Icons:
Do you have any other B&O equipment to test the remote with?
If not, you can test it if you have a digital camera. Point the camera at the transmitting end of the remote and watch the screen as you press a button on the remote.
If it's transmitting, you should be able to see the infra red LED flash on the cameras screen.
It is probably set to Option 0 for some reason.
On the remote, try STBY, SOUND, 1 , STORE
Should now work!
It was effectively an option problem.
It works fine now with option 1
Many Thanks !
Zazou
Location: Strasbourg / France
My B&O Icons:
dear all, I have the same problem but your manipulation doesn't work.
Any others ideas?
Does your remote work Tylerdurden? Check it with your mobile camera as in the earlier post.
You must be logged in as a BeoWorld member to post replies to forum threads.
Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.
Become a Member