Beomaster 7000 sound in front jack only

8 replies
LE
Offline
lenhi
Bronze
Posted February 4, 2026 at 17:40 GMT
#1645426
Yes, I still have this machine driving me crazy, after two tours to a tech. Came back home, plugged it in, and the Powerlink to the speakers does not work.

I set the OPTIONS to A1 and V0, and the SPEAKER to 1, though the display on the Beomaster does not respond to that.

Having gone through a test session guided by AI, the recommendation was to get a new Omron G2R-2-SN (DC24) relay.

I would much appreciate any input on this. Have I got the settings right? Are there any additional tests I should do? The oputput is fiine; it just does not get to the Pentas.

Location: Scania, Sweden

My B&O Icons:

Beoremote-Beo4.png Beoremote-Beo4.png
Beovox.png Beovox.png
Beoplay-Earset.png Beoplay-Earset.png
Beoplay-E8.png Beoplay-E8.png
Beomaster.png Beomaster.png
skolesen
Online
skolesen
Gold
Posted February 5, 2026 at 15:40 GMT
#1672698
I would check that the muting pin in the jack plug isn't permantly connected to GND.
I've seen that before.

/steffen

Location: Denmark

My B&O Icons:

Beoremote-Beo4.png Beoremote-Beo4.png
Beovox.png Beovox.png
Beotime.png Beotime.png
Beoplay-H95.png Beoplay-H95.png
Beoplay-EX.png Beoplay-EX.png
Beoplay-A1.png Beoplay-A1.png
Beomaster.png Beomaster.png
LE
Offline
lenhi
Bronze
Posted February 9, 2026 at 19:52 GMT
#1672731
Thank you for your advice, steffen, but although  I have tested the audio jack on the left side of the front, and have perfect sound when connecting a headset, I do not know what or where the muting pin is.

Location: Scania, Sweden

My B&O Icons:

Beoremote-Beo4.png Beoremote-Beo4.png
Beovox.png Beovox.png
Beoplay-Earset.png Beoplay-Earset.png
Beoplay-E8.png Beoplay-E8.png
Beomaster.png Beomaster.png
skolesen
Online
skolesen
Gold
Posted February 10, 2026 at 21:11 GMT
#1672745
Have you tried to connect normal speakers to SPEAKER 2 output?

Location: Denmark

My B&O Icons:

Beoremote-Beo4.png Beoremote-Beo4.png
Beovox.png Beovox.png
Beotime.png Beotime.png
Beoplay-H95.png Beoplay-H95.png
Beoplay-EX.png Beoplay-EX.png
Beoplay-A1.png Beoplay-A1.png
Beomaster.png Beomaster.png
LE
Offline
lenhi
Bronze
Posted February 18, 2026 at 12:10 GMT
#1672816
Yes, skolesen, I did, and they work, after I touch the volume on Beo4. I had the Beomaster 7000 checked, and it turns out there was a glitch in the audio jack. The Pentas still do not work.

Location: Scania, Sweden

My B&O Icons:

Beoremote-Beo4.png Beoremote-Beo4.png
Beovox.png Beovox.png
Beoplay-Earset.png Beoplay-Earset.png
Beoplay-E8.png Beoplay-E8.png
Beomaster.png Beomaster.png
skolesen
Online
skolesen
Gold
Posted February 18, 2026 at 17:17 GMT
#1672821
Normally if there is only audio in headphone jacket and SPEAKER 2, these can be there reasons:
  1. a bad mute relay (RL1)
  2. bad TR2
  3. the mute pin in the haeadphone jack is constant set to GND.
Next question: Is there audio in SPEAKER 1? If yes, is there 12V on PL pin 3 (PL ON/OFF) when the BM is on? If no check TR5 on the power supply. If yes, then check the PL cables. /steffen

Location: Denmark

My B&O Icons:

Beoremote-Beo4.png Beoremote-Beo4.png
Beovox.png Beovox.png
Beotime.png Beotime.png
Beoplay-H95.png Beoplay-H95.png
Beoplay-EX.png Beoplay-EX.png
Beoplay-A1.png Beoplay-A1.png
Beomaster.png Beomaster.png
LE
Offline
lenhi
Bronze
Posted February 18, 2026 at 17:35 GMT
#1672822
Yes, there is audio in Speaker 1 (passive speakers) when I connect the 4500.

I am learning here; 12V on PL pin 3 must mean the powerlink pins, so I will check that, but which powerlink are we talking about? The PL on the BM is not in use.

TR5? What is that?

Location: Scania, Sweden

My B&O Icons:

Beoremote-Beo4.png Beoremote-Beo4.png
Beovox.png Beovox.png
Beoplay-Earset.png Beoplay-Earset.png
Beoplay-E8.png Beoplay-E8.png
Beomaster.png Beomaster.png
skolesen
Online
skolesen
Gold
Posted February 18, 2026 at 17:49 GMT
#1672823
You have started the same topic in two different forums at the same time on Beoworld without explaining your setup i the Nodic forum.

I thought that your Beomaster 7000 was in a "solo" setup and not a part of a multi room.

So I can't help you there.

 

/steffen

Location: Denmark

My B&O Icons:

Beoremote-Beo4.png Beoremote-Beo4.png
Beovox.png Beovox.png
Beotime.png Beotime.png
Beoplay-H95.png Beoplay-H95.png
Beoplay-EX.png Beoplay-EX.png
Beoplay-A1.png Beoplay-A1.png
Beomaster.png Beomaster.png
or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold