Posts by lenhi
70 total posts61 results
MAsterlink mess
in BeoSystem · Jun 6, 2026 08:59Thanks Madskp! But I did test the kablage, and it was end-to-end perfect. The thing is, I have to run the cable through the ceiling, throught the attic, and then down through the kitchen ceiling, so I would have to enlar…
MAsterlink mess
in BeoSystem · Jun 5, 2026 10:12I had a good signal, meaning that the 3500 showed time on the display, after I tested the wiring thouroughly, but still no sound. Then I got a 1611 connection box instead of the 1614, but before I replaced that, I moved …
MAsterlink mess
in BeoSystem · May 19, 2026 13:26So, here is the situation, so far: I loosened the Masterlink from the 1614 and tried it in the 3500 socket. No sound. I have acquired a teleplug to DIN from Steve, and have tried this with my phone and with my ipad. The …
MAsterlink mess
in BeoSystem · May 13, 2026 19:07Thank you! I will do that next week. Till then, have a good weekend and stay tuned!
MAsterlink mess
in BeoSystem · May 13, 2026 18:13Yes, I disconnected the PL lead between BM7000 and Pentas. The TV’s standby light does not flash at all when setting V.OPT 2. So something else is off, apparently, since the same thing happens again, as before I connecte…
MAsterlink mess
in BeoSystem · May 13, 2026 17:00This was a problem I solved by setting a powerlink between the BM and the left Penta, after everything else failed.
MAsterlink mess
in BeoSystem · May 13, 2026 16:59When I set the OPTION on the BM to 0, it displays 0. When I set the OPTION to V2 on the BV, it displays nothing. The PC function on the BV (I only use Apple TV) has sound and vision, but nothing comes out of the BM.
MAsterlink mess
in BeoSystem · May 13, 2026 16:01The BM7000 AUX/TV socket is connected (with a 7-pin DIN) to the Audio Aux Link ( AAL ) socket of the BL1614 converter; check! The main speakers are Beolab Pentas, and they are both plugged into the Beovision 7. The left …
MAsterlink mess
in BeoSystem · May 13, 2026 10:41I just tried that one, pointing at 3500 with the system in standby, and then in with the TV on. No reaction at all on the display of the 3500. The only reaction I can get from the 3500 is the five second Radio, or TAPE, …
MAsterlink mess
in BeoSystem · May 13, 2026 09:59Dear B&O community After dismantling my MCL system, I am now trying to get my 3500 to communicate with the system, consisting of Beovision7, and Beomaster 7000. It worked fine for a while, paralell to the MCL system, but…
Beomaster 7000 sound in front jack and passive speakers only
in General Discussion & Questions · Mar 18, 2026 17:18Splved it by using the powerlink directly from the Beomaster 7000 to the second powerlink socket on the left Penta.
Masterlink from Beomaster 7000 via 1614 3500
in General Discussion & Questions · Mar 18, 2026 17:07I am attempting to connect the Beolab 3500 at the other end of the house to my Beomaster. The Masterlink cable runs upinto the attic, where I am trying to connect both ends in that little white box, using the appropriate…
Beomaster 7000 sound in front jack and passive speakers only
in General Discussion & Questions · Feb 19, 2026 20:01Hi Julian I have tried all this, but will do again tomorrow, after I connect the 3500 in the kitchen. All dayy I have been preparing to join the Masterlink, which I hope will work
Beomaster 7000 sound in front jack only
in Nordic · Feb 18, 2026 17:35Yes, there is audio in Speaker 1 (passive speakers) when I connect the 4500. I am learning here; 12V on PL pin 3 must mean the powerlink pins, so I will check that, but which powerlink are we talking about? The PL on the…
Beomaster 7000 sound in front jack only
in Nordic · Feb 18, 2026 12:10Yes, skolesen, I did, and they work, after I touch the volume on Beo4. I had the Beomaster 7000 checked, and it turns out there was a glitch in the audio jack. The Pentas still do not work.
Beomaster 7000 sound in front jack and passive speakers only
in General Discussion & Questions · Feb 18, 2026 08:12I have now rearranged my entire setup, abolishing MCL and going for Masterlink. The Beomaster 7000 has had a 6V capacitor replaced, and alll the loudspeakers - Pentas, 4500, and 3500 are gathered in one room. The plan is…
Beomaster 7000 sound in front jack only
in Nordic · Feb 9, 2026 19:52Thank you for your advice, steffen, but although I have tested the audio jack on the left side of the front, and have perfect sound when connecting a headset, I do not know what or where the muting pin is.
Beomaster 7000 sound in front jack only
in Nordic · Feb 4, 2026 17:40Yes, I still have this machine driving me crazy, after two tours to a tech. Came back home, plugged it in, and the Powerlink to the speakers does not work. I set the OPTIONS to A1 and V0, and the SPEAKER to 1, though the…
BeoMaster 7000 issue with powerlink speakers
in BeoMaster · Feb 4, 2026 17:12I have the exact same problem, which ChatGPT analysed as a faulty Omron G2R-2-SN (DC24), a loudspeaker relay, so I will continue from there.
Access OPTIONS on Beomaster 7000
in BeoMaster · Sept 4, 2025 07:59No speakers connected to the BM