Posts by perriama (archived2)
40 total posts30 results
Beolab 4000 Mk2
in General Discussion & Questions · Feb 9, 2022 10:18Indeed and thanks Beobuddy. I have replaced or mended all but this board and was hoping to rescue it, but guess it's not possible. There was obviously some kind of catastrophic power surge on the unit, with evidence of b…
Beolab 4000 Mk2
in General Discussion & Questions · Feb 9, 2022 08:22Narrowed this problem down, and it is indeed an issue with PCB03. Noticed on visual inspection that one of the three pin SOT's had blown. Tested with a multi-meter and nothing. Would normally replace the entire board, bu…
Beolab 4000 Mk2
in General Discussion & Questions · Feb 1, 2022 09:49Hi Beoworlder's, Recently purchased a pair of Beolab4000's Mk2, with the full knowledge that one of them was defective (flashing red light with clicking noise when activated by Powerlink). Have replaced the amplification…
Lab 8000 cracking sound
in Imported Content (Unmapped) · Jan 17, 2022 11:12Hi Phil, I had the same with my beolab8000's (mk1) connected to a Beosystem3 (mk3). Every so often I would get a 'cracking' sound out of just one of them. Almost like a static build-up releasing? Was scratching my head a…
Beolink Gateway
in Imported Content (Unmapped) · Dec 6, 2021 09:42Thanks for the info. Chucky. My Beolink gateway is the old legacy product, so not sure if the LG driver is available for it? I wanted to attached my HASSIO configuration to it, but was told by Khimo that it was only avai…
Beolink Gateway
in Imported Content (Unmapped) · Dec 1, 2021 11:02I have had a love-hate relationship with the Beolink Gateway. At the moment I am loving it. I recently purchased a Beosound Stage (my first foray into the NL products) along with an LG C14. Followed the setup for control…
Beolab 8000 Upgrade
in General Discussion & Questions · Oct 1, 2021 14:25Thanks marexy, I'm getting the vibe that I should refurbish like for like....
Beolab 8000 Upgrade
in General Discussion & Questions · Sept 28, 2021 08:07Thanks for the advise Schletti82. However, that didn't really answer my question? I will need to refurbish my speakers soon, so wanted to understand what is possible.
Beolab 8000 Upgrade
in General Discussion & Questions · Sept 27, 2021 08:36Hi Beoworlders, Has anyone managed to upgrade their Beolab8000's (MK1) with the ICE modules from the later models (>2010)? Is this even possible? Is there more to it than the replacement of the ABL PCB? Thanks
Masterlink and the BV9
in General Discussion & Questions · May 10, 2021 16:21Ok found it. Customer Service menu by MENU > Highlight OPTIONS >RED button then GO Select Adjustments Set to ON - Stats. to MLGW and CMDs. to MLGW
Masterlink and the BV9
in General Discussion & Questions · May 10, 2021 07:52Hi Beoworlders, Have a strange issue with a mlgw that I was hoping someone might be able to answer? When trying to configure the BV9 in mlgw, it doesn't appear to operate as intended. After assignment, I register a singl…
MLGW and a new Philips Hue hub (square)
in General Discussion & Questions · Apr 28, 2021 20:11Thanks for the reply. Gives me a bit of hope. So will perceiver and see if I can get it to work.
MLGW and a new Philips Hue hub (square)
in General Discussion & Questions · Apr 28, 2021 18:54Hi Beoworlders, Just got myself a MLGW and had a good bit of fun connecting all the kit up. Now for the Philips Hue Hub. I have read posts (in particular from Beojeff, great write-up btw.) about the set-up, which I've tr…
Beomaster5/Beosound5 - As if by magic?
in Imported Content (Unmapped) · Sept 19, 2020 12:20Hi Beoworlders, Had a quick question regarding the remote control of the BM5/BS5? I currently have a standalone unit (not connected via masterlink) with the usual network connection, power cord, speakers and the BeoSound…
Beomaster/Beosound 5 dead?
in Imported Content (Unmapped) · Sept 15, 2020 10:25Hi Guy, Blown capacitors are quite easy to spot. The top of the capacitor has a cross pattern cut into the alloy and if the capacitor is damaged in any way, the cross opens up and lets out what looks like insulation mate…
Beomaster/Beosound 5 dead?
in Imported Content (Unmapped) · Sept 11, 2020 15:48Hi Rkopf, I had the exact same issue with mine after a power serge. Check the Beomaster5 main boards (motherboard) capacitors around the CPU. For mine, the first capacitor had blown in the sequence of four. These capacit…
Beomaster5 into a BV9
in Imported Content (Unmapped) · Jul 14, 2020 23:28Thanks Beobuddy. I feared that that was the case. I think I'll keep them as they are.
Beomaster5 into a BV9
in Imported Content (Unmapped) · Jul 14, 2020 20:59Hi Beoworlders, Had a couple of questions regarding the integration of the Beomaster5 into a BV9. The BV9 has had the Beomedia1 running in it with little or no issues, after upgrading the HDD to 2TB and changing the capa…
Buying/configuring used Beosystem 3 w/o dealer
in General Discussion & Questions · Jul 7, 2020 09:26Hey Paul, Just gone through a similar experience replacing a Mk1 with a Mk3 Beosystem in my BV9. The hardest thing I found was getting into it, to swap over the motorised stand cable (this is done by removing the feet an…
BeoSound 5 Not Recognizing CD ID and Track Names
in Imported Content (Unmapped) · Jul 3, 2020 13:16I too was quite disappointed about the B&O CD ripper not tagging its contents. Its a fundamental function of the product. I haven't found any product that can replace the functionality completely. So why don't we owners …