Posts by uzz32soarer (archived2)
22 total posts18 results
Penta 6605 and 6635 compatability
in General Discussion & Questions · Feb 25, 2021 06:026635 inputs
Penta 6605 and 6635 compatability
in General Discussion & Questions · Feb 25, 2021 06:01Good afternoon gents, I run a set of Penta 6635's here in Australia and have my eye on a mint set of 6605 early series 1 speakers. I'm aware that the DIN connection is only 4 pin so the displays might not work properly w…
Beosound 9000 CD player outputs
in General Discussion & Questions · Mar 6, 2020 13:52Thanks Bill. So three ways to get outputs from a 9000? 1. 1/8th headphone jack. 2. Powerlink to B&O speakers or special cable from Powerlink to RCA plugs. 3. Digital RCA output to converter and then to analogue signal
9000 CD player question
in General Discussion & Questions · Mar 6, 2020 13:46Ended up being the axle through the middle of the lifting motor gears had come adrift and allowed the gears to move out of mesh. Took a bit of sorting to get the axle back in properly and then devise a way to make it sta…
B&O equipments not responding to BEO4/5 remotes, help
in Imported Content (Unmapped) · Feb 26, 2020 06:41So as a follow up and closure to this thread regarding a non operational remote for the Beosound 9000. Last week I pulled the unit apart to take a look and see if I could manage to get to the PCB14 IR receiver board whic…
Beosound 9000 CD player outputs
in General Discussion & Questions · Feb 18, 2020 12:04Thanks for the reply. So is the output actually still digital that would need converting before feeding into a SONOS or is it actually analogue
Beosound 9000 CD player outputs
in General Discussion & Questions · Feb 18, 2020 09:34Hi Guys. Looking for some clarification on the outputs under my 9000. Obviously a Masterlink ML series, two powerlinks for the speakers, another 8 pin DIN style which is a input for an Aux or Tape player, and then there …
Controlling Beosound 9000 CD from Beolab 3500.
in General Discussion & Questions · Feb 14, 2020 11:11Yep, I think a new IR board is on the cards. There's a place here in Melbourne who can do it. Once the IR is working, can you see any reason why the 3500 cannot operate with the 9000 and a pair of 8000's in the same room…
Controlling Beosound 9000 CD from Beolab 3500.
in General Discussion & Questions · Feb 14, 2020 10:55On my two later model remotes I did the 2002 thing and both were already in Link Off mode. I turned them both on and then both off. BUT... On my older remote that come with the 9000, I go into config and then 2002 and no…
Controlling Beosound 9000 CD from Beolab 3500.
in General Discussion & Questions · Feb 14, 2020 10:50Thanks Guy. So if you have a 3500 setup in another room, I was pretty sure that you can control the speaker volume in the main room as well as the 3500 volume. The 3500 User Guide alludes to this a anumber of times also.
Controlling Beosound 9000 CD from Beolab 3500.
in General Discussion & Questions · Feb 14, 2020 10:36Yes, been going on for a few weeks now. When I got the 9000 the seller said he hadn't used the remote. More's the point in that I think it didn't work. So I took my remote to a mates place and operated everything in his …
Controlling Beosound 9000 CD from Beolab 3500.
in General Discussion & Questions · Feb 14, 2020 10:17Thanks Guy, so therein lies an issue. The IR receiver on my 9000 has failed which is a primary reason for wanting the 3500 to control it. I can't talk to the 9000 by remote. I wonder if there is a button combination that…
Controlling Beosound 9000 CD from Beolab 3500.
in General Discussion & Questions · Feb 14, 2020 06:07I have a Beosound 9000 and have it connected to a set of 8000 speakers. A little while back the remote stopped working and many trials have led to the position that the IR receiver board has failed on the 9000. The 8000'…
N Radio and N music on Beosound 9000
in General Discussion & Questions · Dec 11, 2019 00:55So as a newbie and recently purchased my first 9000 CD player and 8000 speakers, can somebody please explain to me what N.music and N.radio actually means?
B&O equipments not responding to BEO4/5 remotes, help
in Imported Content (Unmapped) · Nov 23, 2019 07:52Another Beo4 not working. I have a 9000 cd changer and the Beo4 wont operate anything at all on the unit. I changed the batteries and then using my mobile phone camera and looking at the IR emitter, I was able to see all…
9000 CD player question
in General Discussion & Questions · Nov 23, 2019 03:08Next issue. Glass door. I set up the unit this morning, laying flat on a bench and opened the glass maybe 7 times, whilst loading and changing CD's. Played music for a while then went out to work. Just came back inside a…
9000 CD player question
in General Discussion & Questions · Nov 22, 2019 12:03Hey guys. I just purchased my first 9000 series CD changer and in the process of setting it up. The FM antennae plug looks odd, and I'm starting to wonder if it may be the end of a previously installed cable, broken off …