R(
Posts by riesi_m (archived2)
32 total posts

31 results

Sound quality for new and pre-owned Beolab 5
in General Discussion & Questions · Sept 21, 2018 09:17 GMT

mine got 10 this year. can't figure out any issue. they still Sound great!

Some questions on Beolab 5
in General Discussion & Questions · May 22, 2018 05:58 GMT

i think thats not a normal behaviour. mine are blinking both (perfectly in sync), when i change the volume... regards

Can Beolab 5 be controlled by a Logitech Harmony remote
in General Discussion & Questions · May 22, 2018 05:55 GMT

hi haubjes i think AVR is the wrong one... i added a "beosound 3000" (or something similar) in my harmony configutation. beolab 5s reacting on the same commands like the beosounds. then you need to press the same buttons…

Can Beolab 5 be controlled by a Logitech Harmony remote
in General Discussion & Questions · Feb 23, 2018 07:10 GMT

depends on the surrounding. in my previous apartment it was not necessary to have it aligned. since i'm in my new house (in a much bigger living room, and the bl5 in the sunroom with a lot of glass) it is not that easy a…

Can Beolab 5 be controlled by a Logitech Harmony remote
in General Discussion & Questions · Feb 20, 2018 06:12 GMT

i use the hub to control everything. i did nothing special, just place the hub in the range of the lab5s and the rest of my equipment. and yes, it works exactly as you expect. setting it up is straight forward: you add a…

Can Beolab 5 be controlled by a Logitech Harmony remote
in General Discussion & Questions · Feb 19, 2018 10:49 GMT

fully confirmed. thats exactly what i do. have beo4 as backup to set the correct mode, and the daily use is operated with the harmony.

Can Beolab 5 be controlled by a Logitech Harmony remote
in General Discussion & Questions · Feb 15, 2018 17:19 GMT

I can definitely confirm that the Beolab 5 are controllable with the Logitech remotes (I have tried the touch ant the ultimate touch including the hub). they need to be set in to the correct mode (therefore you need a be…

Beolab 5 vs Beolab 9 vs Beolab Penta?
in General Discussion & Questions · Dec 27, 2017 13:21 GMT

And maybe they are not placed correct. I know “you can place them wherever you want “... but that’s not true (when the soundstage is important for you). if possible, try to move them more away from side and back walls (e…

Beolab 5 and Beolab 2 compatibility
in General Discussion & Questions · Dec 22, 2017 06:33 GMT

as you can find in the technical sound guide: "For example, if you have a system that includes two BeoLab 5 and a BeoLab 2 subwoofer, all bass (whether from the main input channels or the LFE input) will be directed to t…

Kopfhörer Form 1
in Imported Content (Unmapped) · Aug 8, 2017 15:12 GMT

ich habe von ca. 3 jahren auch noch neue bestellen können. kann man einfach selbst montieren, da es selbstklebende sind... einfach mal beim händler fragen. mfg

Beolab 9 Set-up
in General Discussion & Questions · Aug 3, 2017 08:31 GMT

how is the hight of your soundstage in that config? what i can report from my BL5 experience, it gets higher when you move your listening position closer to the speakers. i had a similar situation (a bit less then 3 mete…

Beolab 5's (in option 4) and Logitech Harmony (ultimate/hub)
in Imported Content (Unmapped) · Aug 3, 2017 08:16 GMT

sorry double post...

Beolab 5's (in option 4) and Logitech Harmony (ultimate/hub)
in Imported Content (Unmapped) · Aug 3, 2017 08:16 GMT

i also would recommend to contact the harmony support. they are very competent (also on the telephone). i was also missing one command in the harmony. i found the hex code for that command somewere in the internet, send …

Beolab 5's (in option 4) and Logitech Harmony (ultimate/hub)
in Imported Content (Unmapped) · Aug 1, 2017 13:57 GMT

i use the harmony hub with my bl5s. it worked perfect from the first day on. and yess jeff, you are correct. you can send b&o commands from the hub, but you cannot read new commands, cause the reader does not support tha…

Scandinavian moderation versus Bang & Olufsen
in General Discussion & Questions · May 31, 2017 17:45 GMT

i totally agree with the first post. just look at the price rise from one year to the other (for one and the same product, without any improovement)....

Beolab 3 und Beolab 2 oder Beolab 9 ?
in Imported Content (Unmapped) · May 23, 2017 12:15 GMT

und, hast dich schon entschieden?

Beolab 3 und Beolab 2 oder Beolab 9 ?
in Imported Content (Unmapped) · May 17, 2017 07:11 GMT

Also ich würde die Beolab 9 Lösung auf jeden Fall vorziehen. Ein 2.0 System ist einem 2.1 immer vorzuziehen. Speziell wenn du hauptsächlich Musik damit hörst, schadet das erhalten der Symmetrie auf jedenfall nicht. Ich h…

Beolab 8000 and beolab 2
in General Discussion & Questions · Feb 16, 2017 09:44 GMT

no, you don't. the "connect in series" set up is for stereo setups on a beosound, or for older surround setups on a beovision without separate subwoofer connection.

Beolab 8000 and beolab 2
in General Discussion & Questions · Feb 15, 2017 06:11 GMT

sorry double post

Beolab 8000 and beolab 2
in General Discussion & Questions · Feb 15, 2017 06:11 GMT

totally aree. I guess, you can't go wrong with that combo (as long as your room is not tiny). I had this combo too and I think the bl8000 benefit a lot from the bl2. and in my mind, it is also some kind of protection of …