Posts by Egomon (archived2)
46 total posts38 results
Beomaster 8000 relay click and clipping / manual light on, on plugin the unit
in General Discussion & Questions · Mar 15, 2020 08:04I changed the +5v voltage regulator. Now, when plugged in, there are no relay click and the stand by dot is visible. But sadly no reaction when any of the button is pressed. But it is progress in spite of that.
Beomaster 8000 relay click and clipping / manual light on, on plugin the unit
in General Discussion & Questions · Nov 20, 2019 13:23I have on a work bench a eternity Bm 8000 project. It started out as left channel smoker beomaster (bought like this from another person). So I replaced almost everything on that output but still got BM to go on protecti…
Beomaster 8000 erratic behavior on stand by
in General Discussion & Questions · Nov 17, 2019 16:11Well the BM has been performing very well and no fault has presented its self after the first one. I think that still re flow and change of the crystals is necessary in near point n the future. If a fault has presented i…
Beomaster 8000 erratic behavior on stand by
in General Discussion & Questions · Nov 16, 2019 09:20Hi Sanovar and thank you for the reply. Yes that's what I was afraid of. I have seen the Beolovers blog and the change of the crystals in the microprocessor board. I will order them (and the corresponding caps) and make …
Beomaster 8000 erratic behavior on stand by
in General Discussion & Questions · Nov 15, 2019 13:51I re-caped a untouched BM8000 recently. Everything went, for my huge surprise, very smoothly and I had all-ways in my mind that this is to good to me true, so it was not. So I did the necessary adjustments on the two out…
Beogram cdx 2 lid closing and opening 5 mm and closing again
in General Discussion & Questions · Nov 5, 2019 15:14There was a 68 uF in there, I change it and the lid works fine now. Thank you very much Martin Regards Egon
Beogram cdx 2 lid closing and opening 5 mm and closing again
in General Discussion & Questions · Nov 4, 2019 11:16Thank you Martin, I'll try that! Regards Egon
Beogram cdx 2 lid closing and opening 5 mm and closing again
in General Discussion & Questions · Nov 4, 2019 07:31I got this cdx 2 cd player with a BM 8000 system I bought 4 years ago and the lid did not opened completely from the moment I got it. So now I had time to order a new belt from Martin and after I changed it interested pr…
Beomaster 1900-2 Only stand by light
in General Discussion & Questions · Mar 25, 2019 12:13Hi. I tried here to read all about problems/solutions with beomaster 1900 whit the same issue but non ware as mine is. The unit was bought as non runner with just the stand by light working when plugged in. When opened i…
Beogram 8002
in General Discussion & Questions · Dec 5, 2016 08:54I made the tonearm carrier broken part new 3d model available here: https://goo.gl/1hHBNI if someone has the same problem as I did. I don't know other Beograms it would fit, other then 8002?!
Beogram 8002
in General Discussion & Questions · Nov 30, 2016 13:57The start is always in the same position and tonearm drops at the same place. What makes it interesting is the switch works bought times (using it manually when I have space to use it manually or let the tonearm come bac…
Beogram 8002
in General Discussion & Questions · Nov 29, 2016 20:42Hi this is the switch and i believe it is one of your photos that Im using again? If the tonearm comes back to start position on its own it does not work, if I use the switch manually it is working and the switch is work…
Beogram 8002
in General Discussion & Questions · Nov 29, 2016 11:48Hey I just recently bought a beogram 8002 with issue. This is my second in the house. Sadly someone dropped it in the post (nothing new). So I opened it up when it arrived and the rail guide was broken in two places. [Vi…
Beomaster 8000 volume panel wire
in General Discussion & Questions · May 5, 2016 11:21Thank you, all sorted :) Best regards E.
Beomaster 8000 volume panel wire
in General Discussion & Questions · May 5, 2016 10:03Yes I had a look at my pictures before took the panel off...but where on the back of the PC board...?
Beomaster 8000 volume panel wire
in General Discussion & Questions · May 5, 2016 08:18I have a stupid question...where is this wire going? Its loose wire on picture ground wire. Best regards E[View:http://archivedforum2.beoworld.org/themes/hawaii/utility/ :800:0]
beomaster 8000 volume
in Imported Content (Unmapped) · Apr 8, 2016 15:59A little update on the Beoaster 8000. After speaking to Martin (Dillen known here) and Beolover I decided not to repair it my self and accidentally destroying it my self with no knowledge. So I found nice repairman here …
Beogram 8002 with vibration and electric like noise coming from Magnets
in BeoGram · Mar 16, 2016 17:46It seems that it is very very hard to find a Bipolar 39 uf 50 v cap. does anyone has a good Idea from where to get them or what to use if this is not available any more? [View:http://archivedforum2.beoworld.org/themes/ha…
Beogram 8002 with vibration and electric like noise coming from Magnets
in BeoGram · Mar 16, 2016 16:48Hi I have exact same problem and i have changed all the caps (exclude the one in the power supply)-didn't know there was one in there. After doing the re cap on the board the problem remains- disc vibrates and last two d…
Beogram 8002 Repair
in Imported Content (Unmapped) · Mar 16, 2016 15:41Little update. I re-caped the unit and re-soldered the bad's for any loose connection. get a nice respond from the needle, it works and every button works as should. But the vibration of the platter still remains. I clea…