Posts by Audigy (archived2)
22 total posts19 results
Beosystem 7000 and Beolink Wireless
in General Discussion & Questions · Apr 9, 2016 22:12Thanks Stoobie - that's great :D I'm going to go for this now and try and track one down. I thought your Beolab 2000 project looked very good. One of the reasons I want the wireless it to allow me to move the link room s…
Beosystem 7000 and Beolink Wireless
in General Discussion & Questions · Apr 6, 2016 13:07Hi Stoobie, Thanks for the info - that's very helpful. I was not aware of the software version limitation so I'll make sure I get a matching pair if it looks like this set up will work. Would you mind giving me a link to…
Beosystem 7000 and Beolink Wireless
in General Discussion & Questions · Apr 1, 2016 22:18I can't see any reason why it wouldn't work - but I've not been able to find anything online from someone who has actually done it. B&O's support documentation says the 7000 system is not supported - and of course it wou…
Beosystem 7000 and Beolink Wireless
in General Discussion & Questions · Mar 31, 2016 21:16Does nobody know whether BeoLink wireless will work via a BeoLink converter 1611?
Beosystem 7000 and Beolink Wireless
in General Discussion & Questions · Mar 28, 2016 21:15Hi All, I'm hoping this is a simple question - but my research has not found a satisfactory answer so I thought I would ask it here. I've got a Beosystem 7000 and I'm wanting to add a couple of extra link rooms. However …
Beogram CD 5500
in Imported Content (Unmapped) · Jul 20, 2015 22:40I've done a few more checks on the CD5500 this evening to try and work out what its latest issue is. My thinking is that the muting circuit has somehow got activated - which would be the simplest explanation. When a CD i…
Beogram CD 5500
in Imported Content (Unmapped) · Jul 19, 2015 19:09Thanks for that - I have replaced IC1 with a new 7805 and now power has been restored! Great! The temperature of the regulator seems good too - it is certainly lower than the other two regulators bolted onto the same hea…
Beogram CD 5500
in Imported Content (Unmapped) · Jul 18, 2015 20:47Thank you - I've taken a look at this - and unsoldered pin 3 of IC1. When I test that there only seems to be 0.3v. Presumably there should be 5v? There is 13v going in, but almost nothing coming back out. Should I replac…
Beogram CD 5500
in Imported Content (Unmapped) · Jul 17, 2015 20:38AAAH - it was all working fine, and whilst I was testing it playing CDs earlier it suddenly cut out and has lost all power. Not even the standby light illuminates! I've tested the power supply and everything is ok - alth…
Beogram CD 5500
in Imported Content (Unmapped) · Jul 16, 2015 21:59Just thought I would post back and say that the parts from Dillen arrived today and the CD player is all fixed. I replaced the capacitor and rectifier on the main board first, and that fixed the CD drawer not opening iss…
Beolink 7000 issue?
in Imported Content (Unmapped) · Jul 15, 2015 22:46Right I've had a go at this with so far mixed results. I've successfully replaced the caps - and this has restored the two way communication. I had to add and remove the components again but after that it is working a tr…
Beolink 7000 issue?
in Imported Content (Unmapped) · Jul 14, 2015 20:16Thank you for the reply. I did not know about that - but have now tried to remove all of the components and add them back in again. The light on the front of the Beomaster flashes each time I add a component - but unsurp…
Beolink 7000 issue?
in Imported Content (Unmapped) · Jul 8, 2015 22:14Hi all, I've just treated myself to a Beomaster 7000 to replace my 5500. I also bought a Beolink 7000 a few months ago when I was offered one, and was looking forward to being able to use it. However - I've just tried it…
Beogram CD 5500
in Imported Content (Unmapped) · Jul 8, 2015 22:05Hi All, Thanks for the advice. I did check the Zener diode and fortunately that was ok. I've now ordered the parts from Dillen who also advised replacing the four diodes in the rectifier. Hopefully this will get everythi…
Beogram CD 5500
in Imported Content (Unmapped) · Jul 8, 2015 22:05Hi All, Thanks for the advice. I did check the Zener diode and fortunately that was ok. I've now ordered the parts from Dillen who also advised replacing the four diodes in the rectifier. Hopefully this will get everythi…
Beogram CD 5500
in Imported Content (Unmapped) · Jun 30, 2015 20:58Hi, I've done further testing tonight and have found what looks like a power issue. There is not 12v at D5 or pin 4 of IC5. Tracing this back further there is not 15v at the emitter of TR1. Testing the caps with the syst…
Beogram CD 5500
in Imported Content (Unmapped) · Jun 29, 2015 22:21Hi, Thanks you all for your advice. I've spent some time this evening looking at the CD player. I cannot see any broken joints, or loose components. I've also checked the tray switch and that seems OK too. I've tested th…
Beogram CD 5500
in Imported Content (Unmapped) · Jun 27, 2015 15:17Hi Everyone, I'm a newbie to Beoworld but have been very into Bang and Olufsen since first seeing it in the local showroom window in the early 80s. I've accumulated quite a mix of equipment over the years, but a recent p…