Posts by Steven_London (archived2)
53 total posts49 results
BeoLiving news & support from Khimo!
in Imported Content (Unmapped) · Oct 7, 2021 12:58Hi Khimo Team Sorry to raise an old item, but I have now got access to a BLI rather than BLGW and would happily help test the Honeywell Total Connect driver if this is still available for testing? thanks Steven
BLGW version 1.5.2 not booting up
in Imported Content (Unmapped) · Jul 6, 2020 21:19Hi Gary, I returned it to my local shop. From memory I think it was still by days in warrantee and so it didn't cost me anything for repair. I have to admit I would take a look on ebay for a replacement and then decide i…
Motorised blinds and BeoLink Gateway
in Imported Content (Unmapped) · May 12, 2020 13:03Hi Huw, I have configured Somfy blinds to work with my BLGW and it wasn't the easiest thing to do and I have requested that they consider a driver in the future given that Somfy is a well known brand. Initially I used th…
BLGW version 1.5.2 not booting up
in Imported Content (Unmapped) · Mar 23, 2020 11:34Hi, Really old post but I remember this well. In the end the BLGW had to go for repair because of a hardware fault. Not sure and was never confirmed if this was just a coincidence. Steven
BeoLiving news & support from Khimo!
in Imported Content (Unmapped) · Jun 19, 2019 12:29Hi Ivan, I have now installed and configured the IFTTT Webhooks driver, it works like a charm and really simplifies the strings when setting up resources. Many thanks. One more driver that would be really useful, the oth…
BeoLiving news & support from Khimo!
in Imported Content (Unmapped) · Jun 1, 2019 20:29Ivan great news on ifttt and evohome. thanks steven
BeoLiving news & support from Khimo!
in Imported Content (Unmapped) · May 6, 2019 19:37Hi Ivan, It was early days with IFTTT and Webhooks I went into the config screen for Webhooks to see what settings there were. When I saved it definitely changed the key. So I had to change every resource making use of w…
BeoLiving news & support from Khimo!
in Imported Content (Unmapped) · Apr 29, 2019 14:25Hi Ivan, Welcome to the BeoWorld forums. I too still use the BLGW and can't upgrade at the moment because I still have a number of Masterlink products. However, I have been using the BLGW and IFTTT for a while and the in…
new firmeware BLGW
in Imported Content (Unmapped) · Mar 22, 2019 14:00Updated new firmware yesterday. All went well. The Philips Hue driver update did fix an issue where an Innr light could not be addressed directly via the BLGW. So worth the update. Not much else to report.
BLGW and Rako
in Imported Content (Unmapped) · Nov 28, 2018 15:00Hi (late reply). Did you ever change this set-up. Not sure about how the existing Legrand ethernet thing works but if its already running over ethernet is there not a gateway compatible with the existing set-up that coul…
How to set volume levels and power state using BLGW
in Imported Content (Unmapped) · Nov 28, 2018 14:50Hi, You're correct in the understanding of the STATE_UPDATE for network link products this is exactly what it is supposed to be used for. I myself found the online status sometimes unreliable (not checked recent updates)…
Beolink gateway (BLGW) control events and ML control
in Imported Content (Unmapped) · Nov 27, 2018 13:43Hi Rob, From memory but I can test later, I believe that Masterlink products cannot send "status" commands back to the BLGW outside of the Light and Control commands. I have a similar issue with an old ML TV and the only…
BLGW & Alexa without a Khimo account?
in Imported Content (Unmapped) · Oct 31, 2018 08:51Hi Talfaia, Thanks for providing the retailer ID above. I too was interested in setting up remote access and using IFTTT to integrate with Amazon Alexa. I can report it was incredible simple to configure all components. …
BeoVision 11-48 Volume Issue
in General Discussion & Questions · Oct 17, 2018 20:25Hi all, I’m experiencing an issue with my BeoVision 11 which is intermittent but recently becoming more frequent. When I turn on the tv the volume is 01 and the maximum is 02 so basically cannot hear anything. Power cycl…
new firmeware BLGW
in Imported Content (Unmapped) · Aug 30, 2018 08:32Hi, Sorry for late reply, been away on holiday. The problem is with a BV10-32. Its is cabled directly into the mastelrink and the send light commands to the BLGW is enabled. The product cannot be controlled from the BLGW…
new firmeware BLGW
in Imported Content (Unmapped) · Jul 24, 2018 08:41Having now tested things (admittedly very quickly) I've found no issues with the upgrade once accepting the T&C for all users on the system (luckily not many). Control of Networklink and Masterlink products still works. …
new firmeware BLGW
in Imported Content (Unmapped) · Jul 23, 2018 20:48Hi Again, Managed to work out the issue with the web panel and it basically fails to load until the user has accepted the new T&C screen. Basically each user needs to visit the admin page of the gateway and logon and acc…
new firmeware BLGW
in Imported Content (Unmapped) · Jul 23, 2018 20:16Hi everyone, first impression of the latest release is not good. Upgrade went through without issue but post upgrade no users but the admin one can access the web panel or use the iPhone app. So not exactly a well tested…
BLGW and Rako
in Imported Content (Unmapped) · May 23, 2018 21:34Hi Yes I started small with one room my kitchen. Rako is very flexible you can have multiple control pannels for a single room, you set the switches on the back to be the same house id and same room id and they work like…
BLGW and Rako
in Imported Content (Unmapped) · May 23, 2018 10:14Hi, I have used Rako for a number of years now and its a very easy system to install and works with the BLGW, using custom strings or now the new external driver. I basically used custom strings before the driver was rel…