BL3500 not talking to BC9300?

in General Discussion & Questions · Dec 3, 2021 12:15 GMT

I get the "NO ML" message, and pressing any other button (up or down arrow) switches the unit off. I'll double-check the wiring tonight, but the unit has to be communicating at least in one direction since it shows the c…

BL3500 not talking to BC9300?

in General Discussion & Questions · Dec 3, 2021 02:20 GMT

Now that my MCL-2A's are working nicely... I have a BL3500 (kitchen) and LCS9000 (bedroom). The BL3500 sensor for the remote stopped working last summer. I can press the mute button and the front of the speaker and it tu…

Beolink 1000 failure

in General Discussion & Questions · Dec 3, 2021 00:52 GMT

I have a BC9300 and years ago my BL1000 died. But I recently got to playing with again and realized the battery contacts weren't firmly touching the end of the batteries and there was some corrosion. So I scraped the cor…

MCL setup question

in General Discussion & Questions · Dec 2, 2021 04:14 GMT

But wait, there's more! so I have a BL3500 (kitchen) and LCS9000 (bedroom). The BL3500 sensor for the remote stopped working last summer. I can press the mute button and the speaker turns on and plays OK, displays the co…

MCL setup question

in General Discussion & Questions · Dec 2, 2021 02:14 GMT

OK, I tried the 2 and 6 settings and it does what you described and what I wanted! Thanks!

MCL setup question

in General Discussion & Questions · Dec 1, 2021 12:51 GMT

No, I've only tried selecting one option at a time, not the pairs as you suggest. I will give that a try after work this evening and report back!

MCL setup question

in General Discussion & Questions · Dec 1, 2021 04:15 GMT

I have another room with the MCL link, I will try 6 again with that one. It does appear option 6 makes it respond to all codes which is what I want, and what it used to do. I wonder if there is a firmware level in the tr…

MCL setup question

in General Discussion & Questions · Nov 30, 2021 11:40 GMT

I tried 6 and that didn't change anything. Thinking further, I think somehow the transceiver needs to think it's connected to a MCL 2AV so that it responds to video commands (TV, and even volume up & down for video are d…

MCL setup question

in General Discussion & Questions · Nov 30, 2021 04:20 GMT

I've done something to mess up my MCL configuration :( I have a BC9300 in the main room with BL8000s; in a family room I have a Samsung TV, with the sound running to the Aux input of the 9300, and speakers in the second …

S8 run from MCL2A

in General Discussion & Questions · May 11, 2016 01:58 GMT

I had a Cona/CX-50 connected to an MCL2A in a link room, which gets its signal from a BC9300. This has worked fine for years, and I recently decided to upgrade to S8s. I added in the Sounds Heavenly attenuator since its …