Posts by silversmith (archived2)
24 total posts19 results
Beovision 9 Screen Removal How to- but problem not gone away
in Imported Content (Unmapped) · Nov 3, 2016 21:58Sorry meant to say 'will screen from pf10 work with boards from pf9'.
Beovision 9 Screen Removal How to- but problem not gone away
in Imported Content (Unmapped) · Nov 3, 2016 21:56Thanks I was hoping I could repair it by selecting the appropriate boards. For replacement purposes I'm looking at a TH-50pf10, my screen is a TH-50pf9. Will the display from the pf10 work OK with the relevant boards fro…
Beovision 9 Screen Removal How to- but problem not gone away
in Imported Content (Unmapped) · Oct 29, 2016 16:30This is the problem (black strip on the left image) but if I apply pressure to the area I can make the strip temporarily disappear So I decided I would remove the screen and reseat the ribbon cable- it hasn't worked so a…
Beovision 9 in 'Safe Mode'
in General Discussion & Questions · Oct 28, 2016 09:32Thanks, I had a moment of panic thinking I'd not put it all back together correctly. Thanks heavens for this forum😁
Beovision 9 in 'Safe Mode'
in General Discussion & Questions · Oct 27, 2016 14:53*Update* Just unplugged the infrared lead that sends the signal to the skybox and the TV works fine. So it looks like I'm not going to be able to use the beo4 to control Sky which is a little frustrating.
Beovision 9 in 'Safe Mode'
in General Discussion & Questions · Oct 27, 2016 14:53*Update* Just unplugged the infrared lead that sends the signal to the skybox and the TV works fine. So it looks like I'm not going to be able to use the beo4 to control Sky which is a little frustrating.
Beovision 9 in 'Safe Mode'
in General Discussion & Questions · Oct 27, 2016 13:31The problems continue..... So I removed the screen to fix the black strip on the screen, reseated the ribbon cable and now the black strip has gone (for now). Turned TV on, but now it says 'Safe Mode'. I'm also not getti…
Replacing plasma on Beovison 9
in General Discussion & Questions · Oct 18, 2016 09:05Thanks again, this is very helpful and pretty much what I was hoping it would be. Did you replace the whole screen unit and can I use any 'type' number' replacement BV4 unit that is an HD variant? I had been considering …
Replacing plasma on Beovison 9
in General Discussion & Questions · Oct 16, 2016 21:11Hi All, I have a Beovison 9 type 9721. The Tv has developed a black strip about 6 inches vertically from the top on the right side of the screen. I'm thinking this could be one of the ribbon connectors along the bottom? …
Apple TV plugging into a Beovision Avant 32 DVD TV
in Other · Jan 3, 2016 09:22Hi, Wondering if you had any luck getting your 4th Gen Apple tv to work. I have a Beovision 5 and have tried two different types of converter- This- http://www.amazon.co.uk/ESYNiC-Digital-Composite-Converter-Xbox360/dp/B…
Beovision 5 picture flash
in Imported Content (Unmapped) · Mar 29, 2014 19:52No luck with restarting. I've double checked the connection of the leads both on the back of the TV and at the sky box and all seem fine. I was reading on the archive about pin 8. The suggestion was to connect pin 8 to g…
Beovision 5 picture flash
in Imported Content (Unmapped) · Nov 18, 2013 21:55Latest update. The only solution that seems to work is to restart the tv - turn it off from the wall socket. It's been fine now for a month. Fingers crossed.
Beovision 5 picture flash
in Imported Content (Unmapped) · Sept 10, 2013 20:49I think I may have solved the problem. It seems the issue lay with how the sky box was connected to the TV. I switched to the AV channel and now the problem has disappeared. This post /forum/general-discussion-and-questi…
Beovision 5 picture flash
in Imported Content (Unmapped) · Sept 9, 2013 21:53Thanks for the suggestions. I've checked the connection to make sure it's pushed in firmly and it is. The problem still continues. Essentially it seems to be switching between format 1 and 3 sometimes every 5 seconds. Th…
Beovision 5 picture flash
in Imported Content (Unmapped) · Sept 8, 2013 21:12The saga goes on. Changed the lead and all was fine for about a month. Then it started happening again. So I tried the first scart lead and surprisingly it was fine.....for about a month. Anyway it's now happening whiche…
Beovision 5 picture flash
in Imported Content (Unmapped) · Apr 5, 2013 00:15Thanks for the info. I am using quite good scart leads- gold ends- monster I think. They're not the bog standard anyway, so not sure beyond that what to do!
Beovision 5 picture flash
in Imported Content (Unmapped) · Mar 17, 2013 21:22Hi All, I have a beovision 5 SD which goes black every few seconds changing the picture format slightly. It's a bit annoying. I read a while ago that it could be to do with the scart lead connections (I think) but I can'…
Poor sound on beolab 6000's
in General Discussion & Questions · Jun 7, 2012 20:47The price was really good so I've decided to have a go at repairing them. I pretty handy at this kind of thing so it doesn't faze me. I have identified that one of the tweeters doesn't work so I'll replace that. My initi…
Poor sound on beolab 6000's
in General Discussion & Questions · Jun 4, 2012 22:21Hi All, Just bought a pair of beolab 6000's and and ouverture. I know the foams need replacing which is fine but sound at low volumes doesn't seem to have much musicality. My questions is will the poor quality speaker fo…