penta 3 display

in General Discussion & Questions · Jan 18, 2012 14:53 GMT

Now this is bloody wierd the first thing i swoped with the good speaker were the displays and they both definatly worked with the good speaker. I swoped the base's over and only the good speakers base powerd BOTH display…

penta 3 display

in General Discussion & Questions · Jan 18, 2012 13:19 GMT

right ive had it apart again, checked all coninuity from the 6pin display plug to the base and all wiring is good. Ive got 12v at pins 2 & 3 and traced them back to the transformer to confirm, still nothing...

penta 3 display

in General Discussion & Questions · Jan 18, 2012 10:31 GMT

that was looking promising as the cables had been squashed abit so i rewired the damaged parts. The problem is definatly somewhere in the base as i swoped it over with the good one. Ive put a link in to make doubley sure…

penta 3 display

in General Discussion & Questions · Jan 18, 2012 05:19 GMT

if i ignor the display not working everything works exactly as it should. the display (2 x cicuit boards) are good as i swaped them with the good speaker and it works as it should. I sort of ruled out the cable as i used…

penta 3 display

in General Discussion & Questions · Jan 17, 2012 16:09 GMT

i've left the speakers unplugged for a couple of hours, unplugged the ouverture for 10 mins, plugged back int overture then both speakers and still no display on one speaker.

penta 3 display

in General Discussion & Questions · Jan 17, 2012 15:11 GMT

i my case it just never came back on. Any one else thinking sticky relay??

penta 3 display

in General Discussion & Questions · Jan 17, 2012 13:46 GMT

no theyre only connected to the ouverture. im thinking that its a faulty relay, maybe got stuk on which is why the display stayed on and now wont work to activate the display??

penta 3 display

in General Discussion & Questions · Jan 17, 2012 12:56 GMT

HI all I have a pair of penta 3 speakers and an ouverture. last night i turned the ouverture off, both speakers auto turned off, LED's went red but 1 of the displays on a speaker froze and stayed on. The only way i could…