Help with 1800

in BeoGram · Dec 8, 2011 06:43 GMT

Thanks for all your help.

Help with 1800

in BeoGram · Dec 8, 2011 06:42 GMT

[quote user="Søren Mexico"] Adjust the platter hight like this, if you sign up as silver member you can download the whole manual. hmmm, That's interesting. [/quote]

Help with 1800

in BeoGram · Dec 7, 2011 23:46 GMT

The screws are loose and the platter along with the whole bottom moves up and down but seemms it is sitting too low.

Help with 1800

in BeoGram · Dec 4, 2011 22:08 GMT

That worked.

Help with 1800

in BeoGram · Dec 4, 2011 22:03 GMT

Thanks, I'll try to resize.

Help with 1800

in BeoGram · Nov 27, 2011 18:52 GMT

has issues... Sits unlevel. feet missing? also platter sits so low the record scrapes the deck a bit. What's going on here? I tried to post pictures but they are too large.

Help with Beogram 3400 dustcover

in General Discussion & Questions · Sept 13, 2011 20:21 GMT

Thanks to Martin I got the parts needed and it was not easy but I managed to get it back together and now enjoy my 3400 with a functional dustcover. I did let let the spring float free while focussing on the clips first.…

Are there any parts available?

in North America · Aug 9, 2011 19:50 GMT

Thanks again. What you describe is what I see. However, another thing that makes me think something is missing is the feet. On the left side facing the turntable there are two feet?, one front and one rear. They are hard…

Are there any parts available?

in North America · Aug 7, 2011 21:52 GMT

1800 That is the slim plastic based 1800 with an MMC1 cartridge.

Help decide which beogram to keep.

in General Discussion & Questions · Aug 7, 2011 21:48 GMT

I actually have 5 decks fully functional, I mis-counted the first time. And a couple more that could be made functional with a little work perhaps. Anyway I was thinking about moving a couple out and wanted to keep one B…

Help decide which beogram to keep.

in General Discussion & Questions · Aug 7, 2011 18:21 GMT

Thanks for the reply. I looked again for myself a bit closer and could see a sizeable difference in the cartridges. The 3400 also has the MMC 20EN on it now. How does that compare to the cartridge you mentioned.

Help decide which beogram to keep.

in General Discussion & Questions · Aug 5, 2011 21:53 GMT

As you have described i must have the not so rare versions of both. My 1800 then would be the 5811-5 and it is very slim and elegant. The 3400 would be the 5726. By your description I'm sure of that as well. Are the cart…

Help decide which beogram to keep.

in General Discussion & Questions · Aug 4, 2011 22:42 GMT

I have 4 working turntables including 2 beograms, an 1800 and a 3400. Thinking about reducing my inventory a bit. Which of these beograms if either of the beogram models is a definite keeper over the other. Thanks.

Are there any parts available?

in North America · Jul 26, 2011 19:50 GMT

I have a Beogram 3400 that just needs some of the little tabs that hold the dustcover spring hinge assembly together. Thats all. Everything else about this table is good. I would like the dustcover to work though. I also…

Help with Beogram 3400 dustcover

in General Discussion & Questions · Jul 18, 2011 20:53 GMT

I don't know about this picture posting stuff but I managed to get them on photo bucket http://s1198.photobucket.com/albums/aa454/hwystar4/

Help with Beogram 3400 dustcover

in General Discussion & Questions · Jul 17, 2011 22:53 GMT

I picked up a nice Beogram 3400 table the other day with the MMC 20EN cartridge. My first B&O and I like it. It works and sounds good too but I noticed right off something was amiss with the spring hinge for the dustcove…