Posts by BoxOPwn (archived)
26 total posts21 results
Flash your B&O!
in General Discussion & Questions · Sept 14, 2011 18:31Dorm room setup: Beogram 3400, Beomaster 2000, Beovox S80.2
Beomaster 6000 Type 2253
in The Workbench · Jul 11, 2011 17:59Finally back to working on this. I did make the necessary connections with the new capacitors Checked for cracked solder joints, but haven't found any. Checked the trimmer in the reset circuit, its still in one piece. He…
Beomaster 6000 Type 2253
in The Workbench · Dec 23, 2010 14:48Capacitor C1 was shorted, and I replaced it and C10. It turns out my tests on the original rectifier were incorrect, as I compared the original to a replacement. I decided to put the original rectifier back in the unit. …
Beomaster 6000 Type 2253
in The Workbench · Dec 15, 2010 17:10I have been unable to work on it , as I am currently at university. My winter break begins next week and I will begin repairs then.
Beomaster 6000 Type 2253
in The Workbench · Nov 30, 2010 23:09The Jack is not shorted, but I plan to remove it. I did in fact remove the rectifier for testing, but perhaps my testing methods were incorrect.
Beomaster 6000 Type 2253
in The Workbench · Nov 30, 2010 23:06Thanks for clearing things up Dillen, looking at the schematic now this makes much more sense. I beleive the capacitors you are refering to are C1 (3300uF 16V) and C10 (2200 uF 40V).
Beomaster 6000 Type 2253
in The Workbench · Nov 29, 2010 20:47I should also mention that a previous owner soldered wire to both ends of D3 on PCB 6. The wire exits through the bottom of the Beomaster, and is terminated with a 3.5mm jack. I beleive that PCB 6 is for motor control. W…
Beomaster 6000 Type 2253
in The Workbench · Nov 29, 2010 20:39I recently acquired a Beomaster 6000 (Type 2253) in non-working condition. Physically it is in great shape, but it will not power on. Inspection revealed that Fuse 2 was blown. I thought that the bridge rectifier (16D7) …
S 45 Speakerstand, DIY
in Imported Content (Unmapped) · Oct 9, 2010 19:43The stands for my s80.2's have small plastic feet on the bottom, I don't know if these are found on all of the different stands. One of them is missing from my stands, and I would like find a suitable replacement. Does a…
Beovox S80.2 Refoam
in Imported Content (Unmapped) · Aug 20, 2010 12:24Would you happan to know the diameter of the dustcaps on these woofers? The speakers will not arrive until next week, so I cannot measure this as of yet, but would like to order the parts soon.
Beovox S80.2 Refoam
in Imported Content (Unmapped) · Aug 19, 2010 21:42I recently aquired a pair of S80.2s which are in need of a refoam. I am planning on order replacement rings from Good HiFi . They have both rubber and foam rings available, and I am not sure of which material is superior…
Beomaster 3000 Type 2403
in Imported Content (Unmapped) · Aug 2, 2010 15:27I have a few more questions about this Beomaster. - Is there any difference between the two phono inputs besides one being RCA and the other DIN. - Am I correct to assume that the "tape out" is at line level and will hav…
Beomaster 3000 Type 2403
in Imported Content (Unmapped) · Jul 31, 2010 21:14Does anyone know the difference between the Beomaster 3000 Type 2403 and Type 2402? I have been unable to find any information on the Type 2403.
BG 3400/3404
in BeoGram · May 25, 2010 09:51Thank you, your response has been very helpful. I am planning on using an external preamp, and wanted to make sure that there wasn't one built in.
BG 3400/3404
in BeoGram · May 25, 2010 08:54So the US 3400 does not have a built in RIAA Preamp?
BG 3400/3404
in BeoGram · May 24, 2010 22:18Are there any non-physical differences between the US and European versions of the Beogram 3400? I am mainly interested in whether or not the US version has the ability to play quadraphonic records and a built in preamp.
BG 3400/3404
in BeoGram · May 24, 2010 18:03Would you be able to identify the model in this picture? It has an mmc 20EN cartridge, which leads me to beleive that it is a 3404, but I can't be certain that it is the original cartridge. Then again, it does say 3400 o…
BG 3400/3404
in BeoGram · May 23, 2010 22:20Are there any obvious physical differences between the Beogram 3400 and 3404?
Beocenter 3500 Output
in Imported Content (Unmapped) · May 8, 2010 19:37Thanks, your response has been very helpful.
Beocenter 3500 Output
in Imported Content (Unmapped) · May 7, 2010 21:08I would like to have the option to use the turntable with a different amplifier, when listening with headphones.