Posts by Argee (archived)
11 total posts10 results
What's playing RIGHT NOW?
in Music & Film · May 11, 2008 23:53Golden earring - Cut. Nice and loud on the Beogram 6000!
Beogram 6000 mystery spring
in BeoGram · May 5, 2008 02:00Yes i know the spring you mean, as both my 4002 and my 6000 had the same spring floating around inside when i bought them. looked through every service manual i had but cant find it anywhere. The only thing i can think o…
No go at all on 4002
in BeoGram · Apr 8, 2008 04:36Hi. Very Interested. Sent you a E-mail. THanks
No go at all on 4002
in BeoGram · Apr 7, 2008 00:39Hi. Yeah checked the voltage selector in comparison to the circuit diagram i got with the turntable and it is fine. Disconected the plug but fuse still blows so the transformer has had it :(
Usefull links for bits and bobs
in The Workbench · Apr 2, 2008 14:46In New Zealand. http://www.rsnewzealand.com http://www.jaycar.co.nz/ http://www.surplustronics.co.nz Surplustronics got a lot of old stock sitting around too and is cheap, once bought a capstan motor for my Akai reel to …
No go at all on 4002
in BeoGram · Apr 2, 2008 05:11On my 4002 the transformer is hardwired to the fuses and the voltage selector, then has a plug on the end that plugs in to the main pcb. Just had a bit more of a look at it and looks like the transformer is blown, one wi…
No go at all on 4002
in BeoGram · Apr 2, 2008 03:53Hi. No the only thing i did was move it from one room to another. I thought i maybe something on the main PCB so i disconected the plug that plugs the power supply in to it and the fuse still blew, then took the complete…
No go at all on 4002
in BeoGram · Apr 1, 2008 06:15Hi. No only got one. It was going great so i bought a new mmc20e for it, whilst waiting for that to arrive i thought i'd give it another run just to make sure it was all good to go but now just blows out fuses, with rath…
Beogram 6000 / 4002 Problems and Solutions
in The Workbench · Mar 31, 2008 03:49Hi i recently purchased a 4002 and had similar problems with the tonearm not lowering, mine however had a fault in a different place. where the arm pivots on the aluminium bracket. The pivot pin is made of steel and the …
No go at all on 4002
in BeoGram · Mar 31, 2008 02:16Hi I purchased a Beogram 4002 5511 in a not going state got it all up and running like new, purchased a new cartridge for it, went to plug it in today and just made a pop noise, replaced fuse and it blew again, unpluged …