Beovox 5000 - Upgrade

in The Workbench · Feb 8, 2012 01:25 GMT

[quote user="Søren Mexico"] If you had to take it out again, wouldn't the glue damage the coil ?? [/quote] Please have a look at the photo of the filter "before" upgrade (2.nd. photo on this thread) - you will see the th…

Beovox 5000 - Upgrade

in The Workbench · Feb 7, 2012 01:51 GMT

[quote user="Søren Mexico"] Sure looks crowded, I dont see the 3rd coil, is it hidden under the 68 Mu cap, and did you glue the cap to the coil ?? [/quote] Yes, the 68uF cap is glued on top of the coil and to the other 6…

Beovox 5000 - Upgrade

in The Workbench · Feb 6, 2012 14:23 GMT

Casdave, First, thanks for your suggestions, I will certenly check - and remplacer if needed. This is really interesting. What was the final result of your restoration ? /Frede

Beovox 5000 - Upgrade

in The Workbench · Feb 6, 2012 09:36 GMT

I think yours are original Peter, the MKIII have been sold with 2 types of bass units - one with 'big dust cap' and one with small dust cap' /Frede

Beovox 5000 - Upgrade

in The Workbench · Feb 6, 2012 03:34 GMT

I don’t remove any wires at this stage. I only pace the filter at the top of the cabinet and do the work here. I suggest using some protection between the filter and your Beovox 5000. The process require a few changes to…

Beovox 5000 - Upgrade

in The Workbench · Feb 6, 2012 03:31 GMT

I am going to start the process by replacing these capacitors. You need to remove the bass speaker and some damping material. Then you can see the crossover filter. You can then remove the 4 bolts and careful remove the …

Beovox 5000 - Upgrade

in The Workbench · Feb 6, 2012 03:29 GMT

Replace the capacitors in the crossover network Bipolar capacitors produced for more than 50 years ago are dried out and need replacement. I will replace the capacitors with some (expensive) MKT film capacitors (metallis…

Beovox 5000 - Upgrade

in The Workbench · Feb 6, 2012 03:22 GMT

I have started to upgrade my Beovox 5000 MKIII designed for Beolab 5000 (1967-1972). I am planning the following: Replace the capacitors in the crossover network Replace the internal wiring to the bass driver Replace the…

Beovox 2500 Cube - the design lives

in General Discussion & Questions · Dec 4, 2011 09:50 GMT

I found this lamp designed by Hans Haugaard and Niels Esmann (or should we say re-designed ;) The link: http://www.lite-house.dk/shop/knob-bordlampe-230v-6204p.html Some of us saw this design allready in 1967 /Frede

Privat survey of Beolab 5000 - Beomaster 5000 producs

in Imported Content (Unmapped) · Aug 25, 2011 02:12 GMT

...and the Beomaster 5000

Privat survey of Beolab 5000 - Beomaster 5000 producs

in Imported Content (Unmapped) · Aug 25, 2011 02:11 GMT

I did not 'see' this first 2007 type, tks for pointing it out for me and tks for you input. Yes of course you can see the tables with the latest registrations.

Beomaster 5000 - Type 2007 ???

in General Discussion & Questions · Aug 17, 2011 09:59 GMT

[quote user="Large48"] Hi all, Managed to get a Beomaster 5000 set up at long last and was looking at some of the reference sites and have a question. The sites say the earlier Type for a BM5000 is 2005 but mine is a Typ…

Privat survey of Beolab 5000 - Beomaster 5000 producs

in Imported Content (Unmapped) · Aug 6, 2011 05:14 GMT

[quote user="Spanner"] Thought I'd give you my serial numbers as a first post. Beolab 5000, type 5303, serie 02, No 65395 Beomaster 5000, type 2005, serie 01, No 15492 They are both just gathering dust at the moment, alo…

Beolab 5000 repair

in The Workbench · Jul 29, 2011 06:01 GMT

I have sent you an email /Frede

What is this? - Help please

in General Discussion & Questions · Jun 20, 2011 09:33 GMT

So why is this Beomaster 5000 strange? The alu- facia is with only the frequency panel - the channel panel is emty. The Ceramic filters: This version have the piggy-back version - this has for me only been seen in serie …

What is this? - Help please

in General Discussion & Questions · Jun 20, 2011 09:20 GMT

This is my findings re: versions of Beomaster 5000

What is this? - Help please

in General Discussion & Questions · Jun 20, 2011 09:16 GMT

This is my registrations of Beomaster 5000 serie / sn.

What is this? - Help please

in General Discussion & Questions · Jun 20, 2011 09:12 GMT

and with the Görler tuner.

What is this? - Help please

in General Discussion & Questions · Jun 20, 2011 09:11 GMT

This a version with cer. filters.

What is this? - Help please

in General Discussion & Questions · Jun 20, 2011 09:08 GMT

Thanks for all the suggestion, here is the next pictures....