Posts by Djmp
33 total posts28 results
Beolink NL/ML Converter Question
in BeoLink · Sept 12, 2025 15:58I got it working! I turned Timers on with the Beovision 11, and switched to BLC ML Role to V Master (was A Master before). Selecting a CD on the 9000 (A.Opt 0) turns on the Beovision (V.Opt 2) and the CD plays. Thanks fo…
Beolink NL/ML Converter Question
in BeoLink · Sept 11, 2025 06:54I have Timers off, let me try changing that to see if it changes anything.
Beolink NL/ML Converter Question
in BeoLink · Sept 8, 2025 01:07Hi, I have Beosound 9000 connected to a BeoVision 11 via an NL/ML converter, all in the same room. Only the TV has speakers. I can select link->CD on the TV and play CDs and use the Beoremote remote to control the 9000. …
Can't access CD Test Modes on Beosound 9000
in BeoSound · Feb 19, 2024 18:28Figured it out, user error. Beo4 "SHIFT 90258" (Test Mode) -> "CD" (CD 1 shows) ->"OK" (TM NO?) I also had the control panel disconnected so that also was maybe screwing things up.
Can't access CD Test Modes on Beosound 9000
in BeoSound · Feb 19, 2024 05:22Hi, I'm trying to diagnose sledge not moving (SLG ERR 42) and CD that won't start to play on a Beosound 9000 MK1 and I can't get the CD test modes to work. Here's what I'm doing: Beo4 SHIFT 90258. There's a pause and Tes…
Can't add Beolit 12 to the B&O App - crashes
in BeoLit · Jan 30, 2024 15:12Just got the same answer: "Our development team is already aware of this issue and they are working on a fix."
Can't add Beolit 12 to the B&O App - crashes
in BeoLit · Jan 29, 2024 16:15I opened a support ticket. Same problem if the is connected via Ethernet.
Can't add Beolit 12 to the B&O App - crashes
in BeoLit · Jan 29, 2024 06:59Hi - I'm trying to add a Beolit 12 in the B&O app. The app detects the Beolit 12 and shows it "Nearby" but crashes when I select "Next". Same behavior on iOS and Android. Anyone able to add a Beolit 12? s/w version is Da…
Powerlink Speaker Sense plug wiring?
in General Discussion & Questions · Jan 9, 2024 21:57Perfect!
Powerlink Speaker Sense plug wiring?
in General Discussion & Questions · Jan 9, 2024 05:32Thanks. I want to make my own. I’m guessing it’s something simple like a resistor on the enable pin.
Powerlink Speaker Sense plug wiring?
in General Discussion & Questions · Jan 8, 2024 11:29Hi, I would like to make a Powerlink Speaker Sense plug (also called an Option 1 plug) to enable the remote control on a Beosound 9000 being used for line out audio. Does anyone have a wiring diagram for it? Thanks!
Howto setup a NON B&O amplifier with Beolabs (3.1 or 5.1 surround setup with Pioneer Kuro + Pioneer AVR)
in General Discussion & Questions · May 26, 2020 00:40I just switched from a Beosystem 3 to an Anthem MRX 1120. I have Beolab 18, 7.1, 2 and 3 speakers and Cat 7 house wiring. I built a converter using a shielded RJ45 patch panel. It takes RCA line level audio from the prea…
Using a raspberry Pi as a DIY equivalent to Logitech Harmony
in Imported Content (Unmapped) · May 19, 2020 06:19I’ve noticed that IR reliability goes way down if I use in a room with a plasma screen. That produces a ton of IR interference so I think the timing code is getting thrown off and misdecoding the pulse sequence. I’ve see…
Using a raspberry Pi as a DIY equivalent to Logitech Harmony
in Imported Content (Unmapped) · May 19, 2020 06:12Sorry for the delay, was busy with work. I’ll send you a zip of the source. I have it connected to a Pi with some code handling IR events. I’m swapping out a Beosystem 3 for a newer processor but still want to use the Be…
Using a raspberry Pi as a DIY equivalent to Logitech Harmony
in Imported Content (Unmapped) · May 6, 2020 17:25Using a raspberry Pi as a DIY equivalent to Logitech Harmony
in Imported Content (Unmapped) · May 6, 2020 17:22Just to say that the IR eye is working well. Buttons & IR commands report over USB. For fun I added a BLINK command which sets selected LEDs blinking at a 1 HZ rate - I use this to show the attached system is starting up…
Using a raspberry Pi as a DIY equivalent to Logitech Harmony
in Imported Content (Unmapped) · Apr 24, 2020 14:58Thanks samsp! I got the buttons and also LED control going. For IR I do notice that I’ll get occasional misreads of the IR remote, incorrect code reported. Maybe that’s to be expected?
Using a raspberry Pi as a DIY equivalent to Logitech Harmony
in Imported Content (Unmapped) · Apr 23, 2020 05:03dupe
Using a raspberry Pi as a DIY equivalent to Logitech Harmony
in Imported Content (Unmapped) · Apr 23, 2020 05:03dupe
Using a raspberry Pi as a DIY equivalent to Logitech Harmony
in Imported Content (Unmapped) · Apr 23, 2020 05:03Thanks! Should have been more clear in my question though. I have the IR codes via USB and thanks for the remote control mappings. I'm talking about accessing the LEDs and the Timer/Play/Up/Down buttons on the eye. I'm g…