Posts by thch
21 total posts17 results
Beolink 5000 E-Ink screen repair / mod
in Imported Content (Unmapped) · Sept 8, 2021 12:18Hi. I would very much like to buy 2 "repair-sets". Brilliant job :-)
Beolink 5000 E-Ink screen repair / mod
in Imported Content (Unmapped) · Sept 8, 2021 12:18Hi. I would very much like to buy 2 "repair-sets". Brilliant job :-)
Beolink 7000 repair
in Imported Content (Unmapped) · Mar 6, 2020 19:07Just tested the blank IR diodes: no output
Beolink 7000 repair
in Imported Content (Unmapped) · Mar 6, 2020 18:10Hello oracles (!) Have been refurbishing quite a few Beolink 7000's with great success until now. Got a unit in mint visual condition. Changed the batteries and button battery underneath the pcb. Changed all the capacito…
Beolab Penta Mk I with Mk II display
in Imported Content (Unmapped) · Feb 20, 2019 08:57Well... not quite true! This one is really bugging me..... Scenario: Beolab Penta Mk I with refurbished Penta Mk II displays. Display is connected via the 2 pins on the DIN plug. Audio is connected via the RCA plug. Sour…
Beolab Penta Mk I with Mk II display
in Imported Content (Unmapped) · Feb 16, 2019 15:08Problem solved: Display data input ground wire was missing. Now all is working fine :-)
Beolab Penta Mk I with Mk II display
in Imported Content (Unmapped) · Feb 14, 2019 16:37Yup, tried that switch too - no difference. Is there a way to test the display if it works at all?
Beolab Penta Mk I with Mk II display
in Imported Content (Unmapped) · Feb 14, 2019 13:33That switch is included on the pcb (goes to the audio/video input on IC2). I believe I have tried to switch that one too.....
Beolab Penta Mk I with Mk II display
in Imported Content (Unmapped) · Feb 14, 2019 12:07Hello y'all. I have a set old refurbished Penta's Mk I, bought several years ago. No display units in them. Recently I found a set of Mk II displays, and am trying to make them work on the Mk I Penta. First off all, both…
Beocord 9000 calibration issues
in Imported Content (Unmapped) · Dec 20, 2018 10:13No hints anyone ?
Beogram 4000 Type 5215 - dial lights issue [solved]
in Imported Content (Unmapped) · Dec 15, 2018 22:36Fantastic pictures. I had one of these BG's many many many years ago, in fact it was my first Bang&Olufsen item. I regret I sold it. I do, however, prefer the 8002 now - much easier to maintain due to less electronics :-…
Beocord 9000 calibration issues
in Imported Content (Unmapped) · Dec 15, 2018 22:29Hi. Aquired an old Beocord 9000. Have fixed "the usual" problems: Dead segments in the display and non-existing rubber-belt. Plays back fine but I have a problem when it comes to calibration. Auto REC-CAL works but left …
Beomaster 6000 volume preset not working
in Imported Content (Unmapped) · Nov 27, 2018 11:35Well, I have tried to place the uP in a working processorboard and only output is the 3 dots on the freq. display. So I guess the uP is dead.
Beomaster 6000 volume preset not working
in Imported Content (Unmapped) · Nov 26, 2018 13:23I found a "CPU donorboard" from another dead BM6000 and that worked, thanks for guiding me in the right direction. Is it easy to kill the CPU in these machines? The CPU donorboard wasn't working until I changed the CPU (…
Beomaster 6000 volume preset not working
in Imported Content (Unmapped) · Nov 23, 2018 20:46Anyone ?
Beomaster 6000 volume preset not working
in Imported Content (Unmapped) · Nov 23, 2018 20:46Anyone ?
Beomaster 6000 volume preset not working
in Imported Content (Unmapped) · Nov 22, 2018 22:54Hi. There is propably a simple fix, but I haven't been able to find any help in this forum. Problem : Beomaster 6000 (type 225x), volume v and ^ works. Preset volume using slider goes all the way up when not in zero. (ei…