Posts by bulldog123
49 total posts40 results
Bg4002 (ac) not tracking
in BeoGram · Nov 26, 2023 23:36Thank you Sonavor. Will give that a go. Btw the arm does not drop straight down as you suggest but moves slightly towards the center of the record - how do I fix this?
Bg4002 (ac) not tracking
in BeoGram · Nov 26, 2023 00:27Already been re-capped. Will investigate further as suggested. Thank you.
Bg4002 (ac) not tracking
in BeoGram · Nov 24, 2023 21:47Thanks Dillen - thank you for your reply. tracking force measured with scales at 1.2g. Tracking depth was off - it is now correct at o.5mm above low ribs and the tone arm does now move when I rotate the record but….now o…
Bg4002 (ac) not tracking
in BeoGram · Nov 24, 2023 11:59Tonearm not moving with record. The tonearm does not move freely as the record spins and jumps the grooves. I have checked the sensor and this works - if I nudge toward the left the whole carriage moves. I have checked t…
BG400x rosewood trim
in Wanted · Nov 16, 2023 03:06I am looking for a rosewood trim for a restoration project. Needs to be mint.
BG4002/6000 AC Motor version output PCB
in Wanted · May 12, 2023 08:34I am looking for an Bg4000/6000 (type 550x) AC motor version output board. Ideally working. Thanks.
HDMI-ARC on Beosystem 4
in BeoSystem · May 10, 2023 12:49Apologies for any confusion. There is no TV in my setup - only display is a Sony PJ. cabling as follows:- AppleTV 4K (4k video out)>>via HDMI>> Vertex2 (HDMI0 input) Vertex2 (TX1 output - 1080p Video & PCM Audio) >>via H…
HDMI-ARC on Beosystem 4
in BeoSystem · May 8, 2023 09:50I tried the Feintech product and could not get it to work work with my projector Sony VW-VPL590ES. I tried the HD Fury Vertex2 instead - bought from Joe at https://tmfsolutions.co.uk/?s=Hd+fury . with amazing service fro…
Beolab 8000 preventive care.
in BeoLab · Mar 11, 2023 21:17Matador - just did the re-foam - was easy thanks to your detailed instructions- thank you.
Replacement Beogram power and signal cables
in BeoGram · Feb 12, 2023 08:28I am also intrigued by this. Steve do you supply the fixed cables or just the adapter cable to b&o ? It is the black braided fixed cables that interest me - I already have you excellent adapter cables.
Beogram 400x spring contact switch
in BeoGram · Dec 8, 2022 04:11Help! I have a broken contact spring from the control pad - does anyone know where to procure a replacement?
Bg 4000 tonearm behavior
in BeoGram · Nov 27, 2022 21:09Fixed. Thank you Craig and Christian. The down switch contact terminal was oxidized and bent - after cleaning and straightening it works a charm. Tone arm is dropping smoothly now. Sweet sounds are emanating from the dec…
Bg 4000 tonearm behavior
in BeoGram · Nov 27, 2022 12:16Great Craig. Thank you. I hope you make a speedy recovery.