Posts by Blokkenpiloot
199 total posts161 results
(solved) Cover / Side removal of BeoSystem 3
in BeoSystem · Jun 20, 2023 01:45SOLVED: you can slide the panel up when removing the rubber feet! How do i remove the side panel of the Beosystem 3, or is there another good way to glue the missing tab back on, so the side stays nice and flush to the d…
Beolab 7.4 hiss with BeoPort and Beolink Active
in BeoLab · Jun 19, 2023 12:15I have the active with PC and Powerlink. It's attached good, because there is sound (playing from the PC port into the Powerlink socket, but even without the PC port connected, the "hiss" stays)! So yes it works, but the…
Beolab 7.4 hiss with BeoPort and Beolink Active
in BeoLab · Jun 19, 2023 07:57Yes i know, MK3. But it'll hum with all cables, (Old full wired powerlink, MK2 and MK3) on the Beolink PC2, and with the same cables on the BeoSystem3, its good.
Beosystem 3 Analog / delay free 7.1 inputs
in BeoSystem · Jun 16, 2023 10:11Did some testing and made an c# windows program that plays an test tone through the speakers, and measures when the microphone receives the sound. With the Beolink 1611, the delay is 6-9ms With the Beosystem 3 digital PC…
Beosystem 3 Analog / delay free 7.1 inputs
in BeoSystem · Jun 15, 2023 08:06They were all on 1 meter on the last lest, and before on their real distances. which were between 0.1 and 5 meter. But you're smart, didn't think of this, so i definitly will test it later today! thanks. Sound travels 1m…
Beosystem 3 Analog / delay free 7.1 inputs
in BeoSystem · Jun 14, 2023 18:34hi there, I have game mode but i didn't notice any difference. connecting the display to the beosystem 3 will work, but only 1080p.. i got an 4k monitor. standard was 110ms of audio delay, but my screens are way faster t…
Buy and Sell pertmission
in General Discussion & Questions · Jun 14, 2023 14:45no worries: Here's the info: Silver Membership Silver membership offers all of the bronze level plus access to the archive of user and service manuals for B&O products. This level also allows you to post on the "For Sale…
Buy and Sell pertmission
in General Discussion & Questions · Jun 14, 2023 14:41As far as i know, you can only do that with an higher tier member subscription. Correct me if i'm wrong, but now you'll have an answer soon!
Beolab 7.4 hiss with BeoPort and Beolink Active
in BeoLab · Jun 14, 2023 14:32At the handbook they refere to pin 7 with the "braided shield", on my cable it's the other way around. Pin 2 has the shield and 7 the other ground. I can try to change it around, but since it's working with this cable on…
Beolab 7.4 hiss with BeoPort and Beolink Active
in BeoLab · Jun 14, 2023 14:25Thanks, i'll look into that handbook. To clarify: 1. I took the powerlink connector on one side of the cable. And desoldered the wire to pin 7, which then hangs loose. So pin 7 didn't make any contact with the Beolink PC…
CX50 foam or rubber
in BeoVox · Jun 13, 2023 19:02I also liked glueing foam more, as the glue goes into the foam and paper/carton, which made glueing the surrounds more easilly. With rubber i often had spots i had to glue twice, with foam, always first time!
Beolab 7.4 hiss with BeoPort and Beolink Active
in BeoLab · Jun 13, 2023 14:46Hi There, Thanks for your suggestion. I just desoldered pin 7, which i connected to pin 2. And the deeper hum was back. When i touched the (loose) wire 7, to pin 2, the hum was gone again, and only the high pitched "stat…
Beolab 7.4 hiss with BeoPort and Beolink Active
in BeoLab · Jun 12, 2023 12:53Hi all, I used an Beosystem3 for driving a Beolab 7.4 speaker, which worked great! But when i connected it to an Beolink Active, there was an high pitched hiss, and an rumble. Even without volume or without connecting an…
Beosystem 3 Analog / delay free 7.1 inputs
in BeoSystem · Jun 12, 2023 12:33Hi, I have an Beosystem 3 connected to my PC. Only for the audio, because i have 3 screens whereof 2 with an higher than FullHD resolution, and one with 165hz. But now the sound is delayed on the Beosystem 3, even with "…
B&O Loudspeaker Switch IR Eye pinout help requested
in General Discussion & Questions · May 16, 2022 15:12Thanks! I found the +5v (and 12v) coming out of the "Loudspeaker Switch' IR din". Now i will trace the wiring to see if i can determine which pin should be "Data" I attached the MCL IR EYEto the +5v and GND and the light…
B&O Loudspeaker Switch IR Eye pinout help requested
in General Discussion & Questions · May 14, 2022 09:01Hi all, I'm trying to test my "Loudspeaker Switch" When i turn it on, it automatically goes to channel 1, but in order to change channels, you need to connect an IR receiver. Now according to the archieved forum "The IR …
Beolink 1610 / 1611 converter switch!
in General Discussion & Questions · Feb 29, 2020 19:22Hi, I currently have an Beolink 1610 converter! I'm wondering if i could use the 1610 as an 1611 audio source (when connected to a Beolab 3500? There is an switch on this converter to switch between the 1610 and 1611! Do…
Converting a Beovox Rl 2000 to bluetooth
in General Discussion & Questions · Feb 29, 2020 18:24Cheap china bluetooth amplifiers work great with my beovox 901 for example, but also sounds impressive when connecting to larger b&o speakers.
Beolab 3500 NO sound
in General Discussion & Questions · Jan 13, 2020 10:24well i'm not really sure but when i changed the OPT.V setting to 1 on my TV, nothing worked and when i changed it to 2, it WORKS. I don't know the OPT setting on the BEOLAB 3500, but i think it's 5 or 6. But maybe more i…
Beolab 3500 NO sound
in General Discussion & Questions · Jan 13, 2020 06:53Setting the V.opt on my tv did the trick