For Beolab Penta I am looking for an input board (PCB module 22).
That's the one at the bottom of the amplifier with a metal bracket held by four screws to the main chassis, it also carries the sockets.
Martin
Thank you to our Sponsors
Wanted module for Beolab Penta
14 replies
Martin, do you need Mk1 or Mk2/3 (without/with PowerLink)?Lawrence
A mk1 doesn’t have the PCB22.
I’m sure I have 1 spare in my storage. I’m only able to enter that storage not sooner than next Thursday. Due to some renovations
there.
Location: Utrecht
Quite a challenge to achieve "Less is More" while having the Beovirus.
In which case I definitely don’t have a spare.L
Sorry, it's for a Type 6631 (mk3), but I think mk2 (Type 6621) has the same board.
Beobuddy, if you have one, that would be great.
Martin
PCB22 are the same on both mk2 6621 and mk3, 6631. But the board where the sockets are soldered on are modified at the mk3. Where the mk1 and mk2 needs power on pin 1 and 4, has the mk3 board slightly modified by cutting a trace and bringing pin 1 and 4 together. The result is that the mk3 can de powered on with only pin 4.
Martin, I will search for one. Must have one here also.
Location: Utrecht
Quite a challenge to achieve "Less is More" while having the Beovirus.
Still looking.
Anybody?
Martin
As promised. I will look today for the module.
Will be this evening.
Location: Utrecht
Quite a challenge to achieve "Less is More" while having the Beovirus.
Found a mk2 chassis.
Location: Utrecht
Quite a challenge to achieve "Less is More" while having the Beovirus.
- And module 22?
Martin
Please Log In to Reply
You must be logged in as a BeoWorld member to post replies to forum threads.
or
Join BeoWorld
Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.
Become a Member