Depends on the type originally fitted, but in most cases yes.

Martin

Dillen wrote:

Depends on the type originally fitted, but in most cases yes.

Martin

OK, are there recommended types for this, or should ordinary open carbon trimmers (like in original) be used? 

I have been using Piher and Bourns, closed types,

Søren Mexico wrote:

I have been using Piher and Bourns, closed types.

I agree, Pihers (cermet or carbon) are okay and cheap. There are better alternatives, but they are usually unnecessarily expensive.

I have always wondered why B&O didn't use encapsulated trimmers in the first place!

Replace them anyway, but if you can avoid touching the tuner ones, leave them well alone.

OK, I looked up the Piher closed cermet trimmers. These are available with 5 x 10 mm pinout at very decent prices. That looks to me like the best choice. In the drawer I only have cermets with 5 x 2.5 mm pinout, so I'll have to order these.

Agent00soul wrote:

OK, I looked up the Piher closed cermet trimmers. These are available with 5 x 10 mm pinout at very decent prices. That looks to me like the best choice. In the drawer I only have cermets with 5 x 2.5 mm pinout, so I'll have to order these.

You can also order by Martin, also closed and good ones😂, and while you are at it why not the caps too. easier and fast delivery, just not to Mexico