PUC mappings for Beoremote One BT?

4 replies
BE
Offline
Beoet
Bronze
Posted January 23, 2018 at 12:19 GMT
#2168468

Just got a new Eclipse 65 with the BeoRemote One BT. Superb TV, and a timeless - almost sculptured - setup together with the BS9000 and the BL5s !

From B&O Customer service I've got the PUC mappings to control the connected STB, Apple TV 4K and the Sony HDD/DVD (where we've stored all our home videos) that are placed in the basement. But these mappings were for the non BT version of the BeoRemote One. The mappings for the Apple TV 4K works well with the BR One BT. However, there are mappings for the STB and the Sony RDR that don't work.

Anyone that knows how to get "Menu + 1" ... "Menu + 8",  "Shift + 9" and the "Shift + Red/Green.." to work on the BT version?

Some general functions are available through the "List + source + right arrow", but it would have been useful to get the mapping functions to work as expected. (The BV5 / Beo4 controlled the STB & Sony HDD/DVD well)

MA
Offline
martin01
Bronze
Posted January 23, 2018 at 13:07 GMT
#2168469

Hi BeoET,

Dont you just download the PUC-codes in the TV and use these with the connected devices?

Another question to you: Have You tried the Apple TV 4k and shot a 4K-movie yet? Does the centerchannel work (if you have a 5.1-setup with loudspeakers)?

I will receive my Eclipse 65 on sunday from my dealer and I have also bought an Apple TV 4k. I read on another thread that someone had problems with centerchannel when using the Apple TV 4k.

Best Regards
Martin

BE
Offline
Beoet
Bronze
Posted January 23, 2018 at 13:47 GMT
#2168470

Hi Martin, yes - when connecting a source via HDMI to the Eclipse, you select which PUC device to control the IR to that device. However, the mapping I got from B&O sustomer service was with the BeoRemote One  none-BT remote, and these mappings do not work for some functions to the Sony HDD/DVD and the settop box. For the Aplle TV 4K it works well.

We've viewed 4k HDR sources from the Apple TV 4k - looks amazing! We do not have the Eclipse in a 5.1 setup however - our BL5s are "just" extra left & right speakers (we have a 5.1.2 Atmos setup in our home theatre in the basement; Benq - Onkyo - Monitor Audio/Audio Pro). But we've set up different speaker configurations on the Eclipse; All, BL5 + centre, only BL5. Seems to work fine.

BTW Martin: I've also used the OneRemote PL switch to enable Spdif from BS9000 to the BL5s when playing CDs - works very well! Thanks for the info on that!

KA
Offline
kawo
BronzeFounder
Posted September 2, 2020 at 18:02 GMT
#2168471

Just connected my Sony Bly Ray player to theSound Center of the Harmonyand the PUC cable as well. Some basic functions work, but some essential as Skip to the next chapter don‘t (only fast forward).

any ideas how to solve the issue?

or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold