Beomaster 1900 Misschien weet Blackrix raad.

17 replies
KU
Offline
kunsf00
Bronze
Posted October 26, 2018 at 15:40 GMT
#2234921
Hallo, van mijn Beomaster 1900 doet alleen FM1 knop het. De rest 2 t/m 5 licht de zenderindicator wel op wanneer een zender opzoekt echter komt er geen geluid. Wat kan de oorzaak zijn?

Groeten, Fred

🙁

B(
Offline
Blackrix (archived2)
Bronze
Posted October 29, 2018 at 10:17 GMT
#2234922

De afstemming op FM1 doet het wel?

KU
Offline
kunsf00
Bronze
Posted October 29, 2018 at 10:27 GMT
#2234923
Hallo, ja de afstemming op de FM 1 werkt gewoon echter op de rest van de FM toetsen (2 t/m 5) krijg ik geen signaal of ruis binnen.
DI
Offline
Dillen
BronzeModeratorFounder
Posted October 29, 2018 at 10:27 GMT
#2234924

The circuit for the source indicator lamps works closely together with the muting circuit, allowing for a
brief muting of the sound while switching source.
Wrong wattage front panel lamps can leak enough current through the circuit to activate the muting.
Check that the lamps are correct.

If some sources work and other don't, you can confirm the diagnosis by swapping the lamps from one that works and one that doesn't.

I can supply correct lamps, if you need.

Martin

B(
Offline
Blackrix (archived2)
Bronze
Posted October 29, 2018 at 13:30 GMT
#2234925

Lampjes kan een oorzaak zijn, heb je die vervangen? 

KU
Offline
kunsf00
Bronze
Posted October 29, 2018 at 18:04 GMT
#2234926
Kan ik je even een filmpje sturen? Dan wordt e.e.a. wel duidelijk want de lampjes branden normaal. FM1 en FM2 doen het (af en toe met veel ruis). FM 3 t/m 5 lampjes branden, indicator geeft zendersterkte aan maar verder hoor ik niets....???? Groeten Fred
KU
Offline
kunsf00
Bronze
Posted October 29, 2018 at 19:39 GMT
#2234927

Hi Martin, I have some lights from my previous order.

 

 

 

DI
Offline
Dillen
BronzeModeratorFounder
Posted October 29, 2018 at 21:40 GMT
#2234928

The lamps will light up normally - also if they are wrong wattage.
The problem is with the circuit they work in.

If you have some spare lamps from me, try fitting them for the sources that are silent.

Martin

KU
Offline
kunsf00
Bronze
Posted October 29, 2018 at 21:55 GMT
#2234929
Oké Martin, I will try 👍
KU
Offline
kunsf00
Bronze
Posted October 30, 2018 at 12:59 GMT
#2234930
Hoi Martin, The stand-by button does not work from My Beomaster 1900. I have to switch off The Beomaster with The power button. What could be The cause of this?

Using The right lights is importent.

But not in The stand-by mode of The master. This is illuminated by a LED.

Is it obvious that The steering trolley is then defective.

What is The number of The steering trolley?

Greetings Fred
or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold