Is it possible to use 2 BeoLab 11’s with a Moment and BeoLab 3 setup. Can this be done with standard wiring. If possible would the benefits be worth the cost. The use is for music not TV. Thanks
Location: Alabama
Thank you to our Sponsors
Using 2 Beolab11 with BeoLab 3
5 replies
Overkill
Overkill
I agree. Also, I don't find the 11 and 3s being a very good match. I use my BL3s with one BL11, the 3s connected to the output of the 11 and the 11 to a Core, and to me it sounds like the lowpass filtering in the 11 removes a bit too much for the 3s – it sounds like there is a quieter gap between the lower and the mid bass. I guess thing would be better if a Beovision was used, but based on my experiences I would not recommend the BL3+11 combination for a system without manual control of crossover frequency etc.
...but that's just my personal opinion. others might have better experiences of this combination.
I run 3s and 11 through a surround processor, slightly elevating bass on the 11. Very satisfied with that combination.
Kai
I am using a S8 and in my opinion an BL11 is a quiet good Subwoofer,but at a little bit higher music volume levels it is at its end. Because of his relativly small woofers of 10 or 11 cm.I was very happy with it, but with S8 it is very very better... i think. 🙂Greets, Stefan
Please Log In to Reply
You must be logged in as a BeoWorld member to post replies to forum threads.
or
Join BeoWorld
Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.
Become a Member