Thank you to our Sponsors
Hi all,
The new list of supported devices of the STB-controller is now online.
You can find the lists on the following location :
Products / User & Service Manuals / Televisions / Sat Receivers & Accessories / STB-C
- North Europe, version 4.00 (8344784)
- West Europe, version 4.01 (8344785)
- Central Europe, version 4.02 (8344786)
- South Europe, version 4.03 (8344787)
Does this mean that there's an update for the Avant available, or is the update just for later TVs?
Mark
Location: UK
Location: Hampshire, England
To update the STB-C in the AVANT or any other Beovision which does not use flash updates (meaning updates via PC) you need to remove the STB-C and replace the plug-in chip as shown in the picture below
Location: Hampshire, England
> Yes, these updates are for the AVANT as well.
Thank you, Keith. I was about to order the earlier version. Now I'm going to have to work out which is the best PVR/STB to buy, all over again! I guess it's too early to ask for wisdom on this from the group.
It just struck me, though... is the UK classed as Western Europe, or Northern Europe? We could build a case for either.
Mark
Location: UK
West Europe covers f.e. SKY HD 1, SKY+, AMSTRAD SKY HD, and so on.
Iv'e just updated the STB chip on my BS2 MKIII thanks for all the info and pictures etc, it made it a bit easier when you know what your looking for !
My question now would be, I live in the UK, in worcestershire, Digital teresstrial TV is still pretty poor in the area so may hold back on a receiver for a while, but what other Satellite units can I get hold of in the UK does anyone have experience good or bad on what works or not, ie, are the Topfield or Humax decoders any good which models work well more important what does not work well. I take it that the best way to integrate Blu-ray will be to use a PS3 ? or is there a better way.
One of the most important things to me and i'm sure a reason why we all stick with B&O is I only want one remote BEO4
Any help or advice would be appreciated by me and i'm sure by others that read this thread.
I want to control a philips DCR8111 (hd dvr mediabox - upc austria) or a UPC MediaBox DVR (Thomson DCI62UPC). Maby a other receiver (from the list) use the same ir comands?
For info: the normal upc UPC MediaBox Standard (Pace DC621KU) use the came comands from the motoro. Dvi5000 (stb list)
beoandy
Ok, so who can sell me one of these upgrades without trying to charge me £50 just to change the chip?????
I need one!
Cheers
GUY
You must be logged in as a BeoWorld member to post replies to forum threads.
Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.
Become a Member