Bo Xamuel wrote:

Hello.

Does anybody know how to (if possible) control two Beovisions, one 7-40 and one 8-32 separately with one Beo 4 remote, when the two BV's are placed in the same room?

/ Bo Xamuel

You can also adjust the IR strength in the TVs menu settings although this might not add much benefit with just 1 remote. 

Ferdinand wrote:

Hi Bo!

 

 

I have seen in B&O stores in the past that they put a plastic cap over the top of Beo4 to narrow the IR beam (?) so that one really has to point to the device to control it. Maybe that would help?

 

Hi Ferdinand.

Oh yeah! 

I remember seeing that done with Beolink 1000 too! 🙂

The Beonic Man wrote:

You can also adjust the IR strength in the TVs menu settings although this might not add much benefit with just 1 remote. 

Hi.

Haven't been able to figure out where, or how to do that.

Bo Xamuel wrote:

Ferdinand wrote:

Hi Bo!

I have seen in B&O stores in the past that they put a plastic cap over the top of Beo4 to narrow the IR beam (?) so that one really has to point to the device to control it. Maybe that would help?

Hi Ferdinand.

Oh yeah! 

I remember seeing that done with Beolink 1000 too! 🙂

Hi.

Maybe I am a bit slow here?

I simply can't figure out what u mean and how to do it...

Bo Xamuel wrote:

Hi.

Maybe I am a bit slow here?

I simply can't figure out what u mean and how to do it...

If you want to controll the second one all remote command have to start with "Link" command. So to start this BV - Link TV. The first BV can be started with TV.

Thanks. I now set the BV8 to option 4. It turns on when I use the command LINK - TV. The BV 7 doesn't. so far so good. Tried setting the BV 8 to both option 1 and option 2. And when I press only TV on  the remote both tv's still turn on. What's wrong?