ptbb wrote:

my home media also does not work, only show empty content of the nas, but there is more than 150 rip brd. before update it worked perfectly.

Same here, completely blank. Doesn't seem to find any DNLA servers, so I've lost access to my ripped movies.

So, I've got Spotify on my TV....but lost the ability to view my movies :)

I guess they are going to have a tuff week in Struer working this out 👍

Seems like an activationkey is needed for the V1's that were sold early.

Some danish friends have this problem too..

Others are telling that Spotify just appeared after the automatic update - without any fuss.

MM

moxxey wrote:

ptbb wrote:

my home media also does not work, only show empty content of the nas, but there is more than 150 rip brd. before update it worked perfectly.

Same here, completely blank. Doesn't seem to find any DNLA servers, so I've lost access to my ripped movies.

So, I've got Spotify on my TV....but lost the ability to view my movies :)

Had the same issue.  Spotify loaded with the software update, then I was not able to access Homemedia.  While my TV showed wireless "connected", it apparently wasn't.  Disconnected by removing network in the Network menu, then reconnected to preferred network using WLAN.  Homemedia and Webmedia returned. 

symmes wrote:

Had the same issue.  Spotify loaded with the software update, then I was not able to access Homemedia.  While my TV showed wireless "connected", it apparently wasn't.  Disconnected by removing network in the Network menu, then reconnected to preferred network using WLAN.  Homemedia and Webmedia returned. 

I'll give that a go later. My BV11 is connected via a fixed ethernet cable, though. Maybe it's just dropped the network, after update? Would make sense.

The tried and tested 'turn it off, then turn it on again' approach.

[View:http://www.youtube.com/watch?v=p85xwZ_OLX0:800:0]

I have a perculiar issue after having done a "spotify upgrade" on a BV11-46 with a BL11 attached as subwoofer:

After turning on the TV, the BL11 connected to the BV (as SUBWOOFER) apparently receives no signal from the BV. Speaker settings look fine (ie. BV11 appears as SUBWOOFER under SPEAKER GROUP, TV) but the BL11 is not receiving any signal. Mystically, the output/bass signal to the BL11 is restored, if I select "Speaker level" under the SPEAKER GROUP menu. Just entering the "Speaker level" submenu will do the trick, no changes in speaker level is needed. Unfortunately, after turning the TV off and on again, the problem reappears - no sound from the BL11.

Obviously it is quite annoying (to say the least) to have to go through this "reinitialisation process" every time the TV is turned on.

Anyone experiencing the same/similar issues? Looks like a software glitch?

Issue resolved: Last night I managed to resolve the issue by first deactivating the BL11 under the speaker group. Then re-assigning it to "sub front", and thereafter back to "SUBWOOFER" redoing the settings for distance and volume. I am not sure exactly which part of this procedure solved the issue - but everything now works perfectly again. Thoroughly enjoying this new spotify feature - no drops outs at all and in this respect infinetely more reliable than the airplay+ipad/iphone solution.

Everyone seems to be raving about spotify integration on for example the BV11.

It would be great if the damn thing would playback Songs gaplessly, however it does not! Stuff like this really annoys me.

My  mac mini with KODI installed on it does it perfectly, and I would think a high end brand like B&O should have no problems with it either!!!