Hi Franck,

If you have connected the Ouverture to the BS9000 with ML then you need to set one of them to be the master (option 1) and one to be a slave (option 4). You can’t have two audio masters on the same ML network.

But I’m not sure you can set either of those to Opt 4. Give it a try.

If you can’t, then take BS9000 off the ML network and connect one of its Powerlink sockets to the Aux In of the Ouverture using one of Steve’s cables.

Lawrence

Hi Lawrence,

Thanks for your answer. So I make trials and found that option 0 for bs9000 (no speakers connected) then option 6 on Ouverture works perfect.

So this fix my issue on bs9000 side.

Now I would like to try if I can connect Ouverture to both bs9000 and av9000 (more precisely to the AV control center 9000) with a ML splitter. And for this I contact Steve who is my official dealers for my cables already.

So now I have more time to try fixing issue on center 9000.

Thanks

Franck

 

Thanks Franck!

Please link the Ouverture, the Beosound 9000 and the AV9000 with Masterlink cables and then use a junction box to connect the cables together:-

Hi Steve,

 

I would like to switch av9000 as slave and put Ouverture master. With bs9000 as slave it works fine.

I want to put av9000 as Slavs because I've got issue recently with it. I got no more sound from any A/V sources. Because all my installation is inside the wall I did not want to break in order to put Penta direct power link to bs9000 and throw away the av9000....

So I used one Ouverture to plug the Penta and be able to use the bs9000 with configuration I explained before.

Now I wonder if I could split my ML to connect also my av9000 in slave with small confidence that I could play sound through Ouverture audio.... If yes I need then the cable and junction box as discussed in separate mail.

what do you think ? Even if small confidence I'm ready to test.

Thank you

 

 

Hello

 

just to feedback that everything works well now with av9000, Ouverture and bs9000.

I used junction box and ML cables order to Steve and voila !

 

Merry Christmas all 

Thanks Franck,

Glad to hear that all is working.  Also wishing you a Merry Christmas!

Kind regards, Steve.