Re: Help needed for Beolab 5000

4 replies
F(
Offline
flex73 (archived)
Bronze
Posted April 15, 2008 at 03:12 GMT
#1840555

The amp on 1 side of my Beolab 5000 is giving problem. The other is fine.

1) Connected to the BC9300 thru powerlink, when the side switch is push to audio, a pop sound can be heard from the speaker, source display comes on showing there is signal thru, however no sound is heard. Switching powerlink cables yield no result either.

2) Now using the 4-pin speakerlink cables, no pop sound, no display comes on.

Anyone can advise on this problem and propose a solution? Currently running passive due to the above 🙁, please render me your help.

BE
Offline
Beoaus
BronzeFounder
Posted April 15, 2008 at 04:31 GMT
#1840556

Did you try changing or toggling the L and R switches? There is a line in or N on my 4500's which I also tested mine with.

beoaus

Location: Australia

M(
Offline
Mohawk (archived)
Bronze
Posted September 4, 2008 at 16:00 GMT
#1840557

Hi

Do you get sound with the 4pin speaker link?

/Fredrik

RI
Offline
Ridax
Bronze
Posted September 5, 2008 at 01:42 GMT
#1840558

Did you check the low Ohm resistors?

 

or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold