The client has an issue with room calibration on Beloab 5:
The calibration mic comes out half way, then fully, then retracts again and gives a red signal light.
Any ideas what might be wrong and how to rectify it?
Thanks
Thank you to our Sponsors
Problem with Beolab 5 room calibration system
3 replies
The calibration mic comes out half way, then fully, then retracts again and gives a red signal light.
Sounds normal. Only when the red light is blinking, the servicetool can be used to read a possible failure.
Location: Utrecht
Quite a challenge to achieve "Less is More" while having the Beovirus.
But does he hear the calibration sound?Is the problem with both BLs or just one?If there is no sound, it is a hardware problemIf a sound is emitted and the red light is on on only one BL, then the calibration is not successful: try to move the cabinet which is too close to this BL, or try to turn the BL to avoid this cabinetThe calibration mic comes out half way, then fully, then retracts again and gives a red signal light.
Please Log In to Reply
You must be logged in as a BeoWorld member to post replies to forum threads.
or
Join BeoWorld
Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.
Become a Member