Has B&O written what max length on one PowerLink MK III cable must be. ?
Thank you to our Sponsors
PL MK3 max length ?
15 replies
Anyone?
Steve - SoundsHeavenly, perhaps?
MM
Location: Flensborg————Danmark
B&O's Network Link Passive Infrastructure Manual dated 2012 states that 'the maximum total length of Power Link cable today is 100m/325ft in a system.'
Can't see any reference to type of PL cable or max length of a single run.
Location: Warwickshire, UK
My B&O Icons:
10 meter
10 meter
Where's that from?
Location: Warwickshire, UK
My B&O Icons:
From the beolink handbook v1.9
From the beolink handbook v1.9
Thanks. Strange then that B&O sell 20m terminated leads!
Location: Warwickshire, UK
My B&O Icons:
10 meter
Good gosch - I don't hope that those who I helped install 20 meter will come back on me ;-(
MM
Location: Flensborg————Danmark
B&O's Network Link Passive Infrastructure Manual dated 2012 states that 'the maximum total length of Power Link cable today is 100m/325ft in a system.'
Can't see any reference to type of PL cable or max length of a single run.
A 100 meters is in the chart from the BeoLink Handbook version 1.9, that I mailed to Peter Pan....
....but he still don't seem to be convinced.
(Click that pic)
MM
Location: Flensborg————Danmark
From page 101
The Ø 2.5 mm / 0.1” cable (with 4 wires, of which 1 pair is foiled) and marked
with indicating MKIII.
Used with BeoLab 2, BeoLab 3, BeoLab 4, BeoLab 7 series, BeoLab 9,
BeoLab 10, BeoLab 11, BeoLab 12, BeoLab 14, BeoLab 17, BeoLab 18,
BeoLab 19, BeoLab 20, BeoLab 4000 MK II, BeoLab 6002, BeoLab 8002 (i.e.
loudspeakers that are not power supplied using switch mode technology).
Note: cables should not be used in lengths exceeding 10 m / 3 ft due to
sensitivity to noise.
Please Log In to Reply
You must be logged in as a BeoWorld member to post replies to forum threads.
or
Join BeoWorld
Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.
Become a Member