LCS 9000 IR signal issue

5 replies
W(
Willem0709 (archived2)
Bronze
16 posts
Posted March 16, 2020 at 12:47 GMT
#2135455

Hi all,

A couple of days back I have bought a LCS9000 intended to be repaired.

The owner explained the buttons on the unit function correctly but its not selecting a source to play.

After investigation its clear you can only select a source by using a remote control, I have tried using my Beo4 but its not responding to any thing. I opened the unit and see someone has been welding on the "PCB 5, Display, Keyboard and IR Receiver" more specific:

  • D1 (IR receiver)
  • D2 (welded together)
  • C39 (replaced by new component)

By seeing this I wounder if someone knows if the complete print can be re pleased and where to buy?

Further more if anyone would have some knowledge of these components, and has encounter the same issue? 

Best Regards,

Willem L.

W(
Willem0709 (archived2)
Bronze
16 posts
Posted April 11, 2020 at 08:42 GMT
#2135456

Hi all,

I have replaced the following components on the "PCB 5, Display, Keyboard and IR Receiver":

  • C18: 22µF 20% 3,6v (as explained in a different tread)
  • and bought IR recivers SFH235

Now this solved the issue for the remote control however still no sound out of any of the inputs:

  • MCL tested with the IPOD/TV/AIRPORT EXPRESS TO BEOLAB 3500 cable from sounds heavenly (also performed the setup accordingly)
  • MCL connected to Beogram CD 4500.
  • ML connected to a Beosystem 3.

But no sound on any input, is there any known failure that could cause this issue?

Best regards,

69
69er
Bronze
204 posts
Posted May 13, 2021 at 22:13 GMT
#2135457

I have exactly the same issue.

capacitor exchanged, I can switch between cd, radio and so on, but no sound (connected to a Beocenter 2500 with masterlink)

best regards 

69er

BE
beouser19
Gold
60 posts
Posted May 14, 2021 at 09:57 GMT
#2135458

Beocenter 2500? Do you mean beosystem 2500 ? But this have no masterlink do you you converter ?

69
69er
Bronze
204 posts
Posted May 14, 2021 at 10:25 GMT
#2135459

I mean the ouverture which has a masterlink

The 2500 with the sliding doors 

i have 3 beolab 3500 and two of them are not working with the above mentioned symptom 

best regards 

69er

or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold