Hi Solidsnake,

Yes, this can be done, as long as the 2300 is in the same room as the Eclipse and you have "line of sight" for the remote control to both products then you just need this cable from one of the Powerlink sockets of the 2300 to the L/R In socket of the TV to play CD and radio to the TV speakers:-

SS: you mentioned Airplay 2 in your post.  I've readily connected an Airport Express (gen 2) to the AUX-in of a BC 4000/Ouverture.  There is a (final?) software update from Apple that will provide AP2 to the AEx (gen 2).  Use Apple's Airport Utility for the upgrade.

Steve (above) can hook you up with the proper cable to make the physical connection a snap. 

Great. Yes, I use AirPlay 2 across my house at the moment so it would be great to integrate the 2300 into that. I also just came across the update to the Airport Express that enables it for AirPlay 2. So that sounds exactly what I need. So I’m going to try and buy one of those. I also need to get some speakers for the 2300, perhaps the Beolab 2500.

BeoFredric - did you have any issues with the Airport Express and your system? If you AirPlay music to it, does it wake the system from standby or do you need to turn the system on each time?

Steve At Heavenly Sounds - thanks for the advice. I don’t use cd’s so much now so I’m going to go for the AirPlay 2 option to use the 2300 as a wireless speaker hub in the bedroom. What cable do I need to hook up an Airport Express to the AUX input of the 2300? 

Hi Solidsnake,

This cable will allow you to connect an Airport Express to the Aux socket on the back of your B&O system:-

Thanks very much Steve. I’ll order the cable from you once I get the Airport Express and speakers. 

Solidsnake wrote:

BeoFrederic - did you have any issues with the Airport Express and your system?

Solidsnake wrote:

If you AirPlay music to it, does it wake the system from standby or do you need to turn the system on each time?