How to change the line-in of the B&O Transmitter 1?

3 replies

Hi all,

I am new on that forum and looking for help. I hope this is the right way to do.

Can someone help me in getting the line-in setups of the transmitter 1 changed. The issue is that I do not get the transmitter download the WLPSETUP.TXT file to the USB stick and the Manual is not very clear for this point. It just states:

- insert an empty stick into USB-A connector

- the Transmitter will then create a file on the USB memory........

but it does not 🙁

It is not said if the transmitter needs to be connected to the mains or not, how long the stick needs to stay in the slot etc.


I tried several times, but no success: the USB stick remains empty (FAT32, no files before use)

Thanks a lot in advance for your help

Maybe the usb stick must be plugged in before turning on transmitter 1 to write the file ?

Hi BeoIce,

thanks for the quick reply.

I did what you suggested, and in fact, contrary to what happened before, the transmitter wrote SOMERTHING to the USB stick: a lot of unidentifiable folders ("journals.xxxxx", but all empty) and files, but nothing which looks like the expected WLPSETUP.TXT.

- I disconnected the transmitter from the mains

- I put the stick into the slot

- reconnection to the mains

- red control light of transmitter switched on, stick was blinking. After a short moment red light switched off, stick stopped blinking

-disconnection from mains

- removal of stick

- read out of stick in PC --> nothing useable found

or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.