Hi all.
New here, just got a Beomaster 3000-2 and wondering anyone knows of a DIN switch to be able to increase the number of connections? I found an old thread (from 2008!) but the links had gone.
Thanks in advance
Mark
Thank you to our Sponsors
DIN switch
4 replies
Hi and welcome to Beoworld!
If you want to connect B&O equipment you will need the full 7 pin connections to allow datalink (hence control other input devices). B&O used to make such a device, and they sometimes come up on eBay (mine was about £15 a few years back). Here's a picture: link
But if you are adding non-B&O stuff then something like this is ideal (from our site sponsor!): link
EDIT: If it's the 1970s Beomaster 3000-2 then I think the DIN inputs only have five pins, hence the second adapter above will be fine!
Location: Warwickshire, UK
My B&O Icons:
Thanks Guy.
It is the 1970's version with the 5 pin DIN, i will check out the second link.
all the best
Mark
B&O also made very small adapters giving you a switchable 5 or 7 pin din and a cinch input.
So you can switch between a 5P din or a stereo cinch on a 5P din input.
I have several of those still, feel free to PM me if interested.
Please Log In to Reply
You must be logged in as a BeoWorld member to post replies to forum threads.
or
Join BeoWorld
Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.
Become a Member