Did my BLC NL/ML die?

11 replies
fansastic
fansastic
Bronze
813 posts
Posted May 17, 2020 at 13:13 GMT
#2138590
Hi all,

I’m experiencing problems with rebooting my BLC NL/ML, it flashes green and does not get solid, resulting in no communication what so ever. Tried hard reset with button in different sequences but no result. Tried beo setup app, direct ip address via computer among others. The green light keeps flashing and as I understand the setup manual correctly it first should get solid green before establishing a connection with the converter.

Any thought?
BE
beojeff
Bronze
2851 posts
Posted May 17, 2020 at 13:45 GMT
#2138591

I've found that completely removing the power for a good length of time can sometimes help with an NL/ML Converter isn't responding.

fansastic
fansastic
Bronze
813 posts
Posted May 17, 2020 at 13:51 GMT
#2138592
beojeff wrote:

I've found that completely removing the power for a good length of time can sometimes help with an NL/ML Converter isn't responding.

I’ll try that, thanks and hope this fixes it because tried everything els that seems logical to my limited IT knowledge
carolpa
carolpa
Bronze
2534 posts
Posted May 17, 2020 at 14:38 GMT
#2138593

Fansastic wrote:
beojeff wrote:

I've found that completely removing the power for a good length of time can sometimes help with an NL/ML Converter isn't responding.

I’ll try that, thanks and hope this fixes it because tried everything els that seems logical to my limited IT knowledge
Did you try a factory reset? (nb: only leave the mains connected)

 

fansastic
fansastic
Bronze
813 posts
Posted May 17, 2020 at 14:41 GMT
#2138594
Yes I did multiple times. No result, keeps flashing green
carolpa
carolpa
Bronze
2534 posts
Posted May 17, 2020 at 14:44 GMT
#2138595

Fansastic wrote:
Yes I did multiple times. No result, keeps flashing green
Also with only the mains connected?

 

fansastic
fansastic
Bronze
813 posts
Posted May 17, 2020 at 14:54 GMT
#2138596
Carolpa wrote:

Also with only the mains connected?

Yes
carolpa
carolpa
Bronze
2534 posts
Posted May 17, 2020 at 14:59 GMT
#2138597

Fansastic wrote:
Carolpa wrote:
Also with only the mains connected?
Yes
I had the same experience twice, but in the end with accurately following the procedure in the picture, I always managed to bring the BLC back alive/operational. 

 

fansastic
fansastic
Bronze
813 posts
Posted May 17, 2020 at 15:00 GMT
#2138598
Carolpa wrote:

I had the same experience twice, but in the end with accurately following the procedure in the picture, I always managed to bring the BLC back alive/operational.

I keep trying, focus only on factory reset ?
R(
rotel1111 (archived2)
Bronze
153 posts
Posted May 17, 2020 at 17:56 GMT
#2138599
If factory reset and then mains off for 20-30 mins doesn’t help, the PCB01 ( with pre-programmed Eeprom ) has to be replaced.
or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold