Creating a Beovox 7.4
That is what usually is recommended in such cases.
MM
Location: Flensborg————Danmark
Of course you could rip out all the electronics.
You'll just need to know the crossover frequencies of the speaker chassis inside the Beolab 7.4 and a passive frequency crossover with matching frequencies that you can install in the 7.4 housing. Than you can use it with every external amplifier.
I guess it will be very interesting to listen for the differences of the passive version and the B&O active version.
Would this unit from Steve solve the problem? https://soundsheavenly.com/line-in-connection/33-power-amplifier-to-beolab-line-in-attenuated-convertor-kit.html
I recommend this too. That way you can fully preserve the original sound. Plus, as the loudspeaker relies on ABL for low-end extension, you would lose a significant amount of bass in an active to passive conversion.
Location: Denmark
Please Log In to Reply
You must be logged in as a BeoWorld member to post replies to forum threads.
Join BeoWorld
Register to access the forums, reference material, and exclusive member benefits β including our monthly prize draw.
Become a Member