Hi Marcel,

Welcome to Beoworld!  Yes, you can easily get everything working, with full control from the Beo4 remote.

Please connect all the speakers to the TV with Powerlink cables.  For the Beolab 7.4, 2500 and 6000 speakers, you can use mk.3 Powerlink cables:-

link

For the Beolab Penta speakers, please use fully wired Powerlink mk.2 cables to get the speaker displays working:-

link

Please link the Beosound 3200 to the TV with a Masterlink cable, then you can play CD and radio to all speakers via the TV, with full control of the volume:-

Hello Steve,

thank you very much for your answer. Before I order all my cables, I have still some questions.

can I make a “powerlink chain”?

• Left speaker setup:  start with a powerlink 8/8 from Bv7 to the first Penta and than from the Penta to the first BL6000 with a powerlink 4/4
• Right speaker setup: same as above

The BL2500 are now connected by a Y split 4/4 powerlink cable at mine Beosound 3200. Do i disconnect them and connect them to bv7? Or....

can i leave this setup as it is and just place a ML cable between the bs3200 and the Bv7?

hopefully you can advice me again. Thank in advance!

Hello Steve,

thank you very much for your answer. Before I order all my cables, I have still some questions.

can I make a “powerlink chain”?

• Left speaker setup:  start with a powerlink 8/8 from Bv7 to the first Penta and than from the Penta to the first BL6000 with a powerlink 4/4
• Right speaker setup: same as above

The BL2500 are now connected by a Y split 4/4 powerlink cable at mine Beosound 3200. Do i disconnect them and connect them to bv7? Or....

can i leave this setup as it is and just place a ML cable between the bs3200 and the Bv7?

hopefully you can advice me again. Thank in advance!

Hi Marcel,

Thanks for your reply.  When you are connecting speaker to a B&O TV, please only make a chain with one pair of speakers (eg. Front Left and Front Right speakers), otherwise if you chain more than two speakers you will lose the surround sound from the TV (you will only get stereo sound).

So, you can chain the two Pentas together, but you should not chain these to the other speakers.

You can leave the Beolab 2500 speakers connected to the Beosound if you wish, but you may get better results by adding them to the TV instead to work with the other speakers for full surround sound.

Kind regards, Steve.