Thank you to our Sponsors
Hello B&O community,
Long time I don't post. A friend of mine gor from me a pair of BL9s and he is trying to connect them to a Panasonic TX-P65VT50E. I initially told him he could do it by connecting a BS3200 or a BS4 to the Panny TV and the labs to the BS and that should be it, however in looking at the TV specs and browsing here and there I see this is not that simple. These is the spec sheet for the TV:
Hello Gustatvo,
To make the Beosound option work:
To connect VT50 to Besound you can use analoge sound from AV1 as it is in/out (see BeoIce's post here /forum/general-discussion-and-questions/flash-your-bampo---new-thread
To make BS2 work:
You will need an ir-Eye to control BS2
You will need a converter from optical digital sound to coax. digital sound
You will need a jumter between pins 2+3, otherwise BS2 will not start
You should use 3 speakers with BS2 (Center + Stereo)
to connect Beolabs directly:
you have to get analoge sound signal (see answer a) and connect to BeoLabs' line in. They will turn on/off as line signal is present.
hfat
.... or you can use a much cheaper alternative with a Panasonic to BeoLink converter like the one below:
You must be logged in as a BeoWorld member to post replies to forum threads.
Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.
Become a Member