Configuration NL/ML - old /new

16 replies
ruwi
ruwi
Gold
127 posts
Posted May 1, 2019 at 21:25 GMT
#2122578

Hello

My set up is: Beosound Ouverture with ML to various rooms. In the same room I have BV 11 and Beolab9,

The speakers are connected via Almando switch. New I would like to integrate Beosound Moment to listen to web radio. I have got ML/NL converter and delay box.

My worries are how to connect and how to setup the system to work satisfying. The remote control should be able to serve the Ouverture, for the other rooms, and the Moment in the living room.

Thank you for any hint.

Regards Ruedi

My B&O Icons:

Beoremote-Beo4.png Beoremote-Beo4.png
Beovision-Contour.png Beovision-Contour.png
Beovision-10.png Beovision-10.png
Beotime.png Beotime.png
Beosound-A5.png Beosound-A5.png
Beosound-5.png Beosound-5.png
Beoplay-H8i.png Beoplay-H8i.png
F(
f5434964 (archived2)
Bronze
242 posts
Posted May 2, 2019 at 10:16 GMT
#2122579

Hello!

i have a similiar setup with a BV Avant connected by ML/NL Converter to my ML system; as far as i remember the BV should be able to provide Net Radio; so maybe the Moment would not be needed...

best regards elmar 

sorry for Spelling - iOS written 

Millemis
Millemis
Bronze
15984 posts
Posted May 2, 2019 at 10:26 GMT
#2122580

Sure, the BV11 has a Netradio function built-in.

This can easily be distributed to ML-products like the Ouverture.....but you will need the NL/ML Converter for that.

MM

Location: Flensborg————Danmark

ruwi
ruwi
Gold
127 posts
Posted May 2, 2019 at 10:53 GMT
#2122581

Thank you Elmar. I will try this setup, but I like the Moment for the mood wheel.

My B&O Icons:

Beoremote-Beo4.png Beoremote-Beo4.png
Beovision-Contour.png Beovision-Contour.png
Beovision-10.png Beovision-10.png
Beotime.png Beotime.png
Beosound-A5.png Beosound-A5.png
Beosound-5.png Beosound-5.png
Beoplay-H8i.png Beoplay-H8i.png
ruwi
ruwi
Gold
127 posts
Posted May 2, 2019 at 10:53 GMT
#2122582

Thank you Elmar. I will try this setup, but I like the Moment for the mood wheel.

My B&O Icons:

Beoremote-Beo4.png Beoremote-Beo4.png
Beovision-Contour.png Beovision-Contour.png
Beovision-10.png Beovision-10.png
Beotime.png Beotime.png
Beosound-A5.png Beosound-A5.png
Beosound-5.png Beosound-5.png
Beoplay-H8i.png Beoplay-H8i.png
ruwi
ruwi
Gold
127 posts
Posted May 2, 2019 at 10:59 GMT
#2122583

Thank you MM. I understand, that with NL/ML the signal will be available on old and new products.

How will I be able to select the sources trough say BS3500 in the kitchen?

 

My B&O Icons:

Beoremote-Beo4.png Beoremote-Beo4.png
Beovision-Contour.png Beovision-Contour.png
Beovision-10.png Beovision-10.png
Beotime.png Beotime.png
Beosound-A5.png Beosound-A5.png
Beosound-5.png Beosound-5.png
Beoplay-H8i.png Beoplay-H8i.png
F(
f5434964 (archived2)
Bronze
242 posts
Posted May 2, 2019 at 11:32 GMT
#2122584

Not beeing at Home i can not provide and pictures; you can easily set up the Converter over any Internet Browser by using its IP address; you will find an on screen menu where you can set your available sources (separated NL and ML) - so be aware not to assign 2 sources to one command (e.g. Radio or CD); than you can easily Access any Source by Beo4 on your devices; I have connected my BL to the Avant so you can select sources on Avant as well 

Millemis
Millemis
Bronze
15984 posts
Posted May 2, 2019 at 14:56 GMT
#2122585

Wild Ruedi wrote:

How will I be able to select the sources trough say BS3500 in the kitchen?

This - as f5434964 wrote - depends on how the converter is programmed.

However to reach the NL sources on the BL3500, this much understand the commands that you use there.

There are different versions/sw versions of the 3500 - depending on how old it is.

Not knowing this - you will have to try out, what works.

Also some of the newer commands N.Radio/N.Music are reuses of older commands Phono/A.Tape2

MM

 

 

Location: Flensborg————Danmark

ruwi
ruwi
Gold
127 posts
Posted May 2, 2019 at 15:25 GMT
#2122586

Understood, thank you. What do I need to connect if I use BV11 as Networkradio? NL/ML for shure but the delay unit? Anyway I shall start try and error methode.

Thank you all for your support. I will report  my experience.

Regards Ruedi

My B&O Icons:

Beoremote-Beo4.png Beoremote-Beo4.png
Beovision-Contour.png Beovision-Contour.png
Beovision-10.png Beovision-10.png
Beotime.png Beotime.png
Beosound-A5.png Beosound-A5.png
Beosound-5.png Beosound-5.png
Beoplay-H8i.png Beoplay-H8i.png
Millemis
Millemis
Bronze
15984 posts
Posted May 2, 2019 at 15:56 GMT
#2122587

Maybe studying this (old) thread can help:

/forum/general-discussion-and-questions/nlml-delay-box#post-1995431

MM

Location: Flensborg————Danmark

or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold