This procedure works for the Beosound 3200 and I think its the same for the Ouverture

The glass doors can only be locked if your Beosound is in Standby.

Press SHIFT 9 0 3 6 9 with no more than 2 seconds between the individual numbers being entered.
The display shows “LOCKED”.
To unlock the glass doors press SHIFT 9 0 3 6 9 with no more than 2 seconds.
The display shows “UNLOCKED”.
The function will be saved in NVRAM if you disconnect from mains.

If you are using the Beo4 then you will need to add the SHIFT command to your LIST before doing the above.

Thanks Keith, works great!!!

do you have a solution for the stand problem?

many thanks

james

Hi Keith, it did not work for me, have a Beo4 + Ouverture

I put the Ouverture in standby, then pressed list to bring up SHIFT on the display of the Beo4, then pressed 9 0   but the Ouverture then came out of standby and UNKNOWN flashed on the display of the Ouverture

what Ouverture model no have you Harry ??

Your said:-

ouverture wrote:

I put the Ouverture in standby, then pressed list to bring up SHIFT on the display of the Beo4, then pressed 9 0   but the Ouverture then came out of standby and UNKNOWN flashed on the display of the Ouverture

After you pressed LIST and found SHIFT, did you press OK before pressing 9 etc ?

Hey I can't get my Ouverture out of standby mode.  I have tried the Shift >90369 but nothing happened.

Old thread but similar question. Is there a way to lock the doors in the BeoSound Century? The solution proposed above does not work. 

Please advise.

It doesn't work with my Ouverture. I tried both Beo4 and 1000

wasti wrote:

Is there a way to lock the doors in the BeoSound Century?

Unfortunately, the locking facility implemented on the Ouverture does NOT exist on the Century

Thx Keith! I was afraid that this won't work as there is no info about it in the service manuals.