Thank you to our Sponsors
Hi there,
The BV Avant from my parents has a weird problem. The BV reports that there is "no signal" from the Apple TV that has been connected since installation. New HDMI-cable didn't work, using any of the other HDMI inputs didn't work either. Any troubleshooting tips?
(I know I should try to connect another product to the BV, but that's not an option atm due to distance and very tech-illiterate parents).
1st be sure the ATV works. Is it properly connected to the mains? Use the Apple remote to see if the ATV response. Maybe it will not come out of sleep! then unplug/plug the mains. 2nd. still not sure: hdmi connect the ATV to a computer monitor and use the Apple remote.......... does it work?Hi there,The BV Avant from my parents has a weird problem. The BV reports that there is "no signal" from the Apple TV that has been connected since installation. New HDMI-cable didn't work, using any of the other HDMI inputs didn't work either. Any troubleshooting tips?
(I know I should try to connect another product to the BV, but that's not an option atm due to distance and very tech-illiterate parents).
Connect the ATV at another hdmi-connector which has not been used and/or not been programmed. The TV should respond with a remark about a new connected device.I know I should try to connect another product to the BV,
Location: USA / Denmark
My B&O Icons:
You must be logged in as a BeoWorld member to post replies to forum threads.
Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.
Become a Member