BV-7 40 MkIII software

16 replies
MI
Offline
mikaelb
BronzeFounder
Posted March 28, 2008 at 07:39 GMT
#1838566

Does anyone have an overview of what is updated in the different software releases for BV7-40. Some kind of releasenotes or something from B&O?

In my case I am interested in what is new from my release 3.5 and up to the newest.

/Mikael

R(
Offline
Rombeek (archived)
Bronze
Posted March 28, 2008 at 08:45 GMT
#1838567
And: has anyone already spotted SW 4.2 ?!
MA
Offline
martin01
Bronze
Posted March 28, 2008 at 09:39 GMT
#1838568
Sw 4.2 will be released "soon" according to B&O. Maybe April....
J(
Offline
JoC (archived)
Bronze
Posted March 28, 2008 at 11:57 GMT
#1838569
Is there any word yet on a fix for the "white flash", or will I just give up asking, and pretend I don't see it anymore...
A2
Offline
a2bur
BronzeFounder
Posted March 28, 2008 at 14:09 GMT
#1838570
I've had three versions of software in my 7-40 and haven't noticed any difference between them . Arrived with 3.5 ( 3 weeks ago ) and had it upgraded to the latest 4.12 , it then started to shut down about once or twice a day , they decided to go back a version to 4.00 to see if 4.12 was the problem but still does it , looks like they are going to replace the set . They did tell me the difference between 4.00 and 4.12 and can't remember what but nothing significant . I've always had the white flash with Blu-ray ( pencil thin line bottom left ) but only on the menu , never during the film . I wasn't to happy going backwards with the software but perhaps the new one will have 4.20 .
Richard
MA
Offline
martin01
Bronze
Posted March 29, 2008 at 10:06 GMT
#1838571

Hi, if you have sw 4.0 you can get rid of the white flashes, just doing the following:

Go in to the picture-meny and when you are looking at bluray-movies the "size" potentiometer is activeted. Put the potentiometer one step below maximum. This will zoom the picture a little, but you will not see any white flashes anymore.

/Martin

MR
Offline
mr_anders_son
BronzeFounder
Posted April 10, 2008 at 14:19 GMT
#1838572

The interference issue is SOLVED!!!! 

My dealer has update my BV9 to 4.17a and NO 24p

 

B(
Offline
Beolab (archived)
Bronze
Posted April 10, 2008 at 19:54 GMT
#1838573
MR
Offline
mr_anders_son
BronzeFounder
Posted April 11, 2008 at 01:30 GMT
#1838574
....mr anders(son):

The interference issue is SOLVED!!!! 

My dealer has update my BV9 to 4.17a and NO 24p

 

 

4.18 is the latest firmware, and the 4.2 24p upgrade i hope will be release during this month !

 

4.18?

4.17 is dated 080405!!

and this is for BS3 (BV9 and BV4) 

Maybe 4.18 is for BV7 !

B(
Offline
Beolab (archived)
Bronze
Posted April 11, 2008 at 01:39 GMT
#1838575
Beolab:
or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold